1:35 Wall Clocks

1:35 Wall clocks is a printed paper accessory for a diorama in 1:35 scale from ETA diorama, not a kit and not a waterslide decal. The sheet offers printed dials of wall clocks for gluing into interior scenes.

Scale1:35
Manufacturer ETA diorama
Product EAN8591111000000

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wall clocks 1:35 – a printed accessory for a diorama

This is a printed paper sheet from ETA diorama for scenes in 1:35 scale. A clock on a wall is a small thing that at this scale practically cannot be painted by hand: the dial is a few millimeters across and the hands are thinner than a hair. Printing solves that for the modeler, so an interior gets a detail that would otherwise stay just a white circle.

How to turn a flat circle into a clock

Cut the dial out as accurately as you can – with round shapes a punch or a sharp hollow needle of a suitable diameter helps, because a hand cut with a knife is hard to keep true on a small circle. Then back the paper with a disc of plastic or card, so that the clock gains thickness and casts a shadow on the wall. A thin strip of paper or a ring from plastic tube glued around the circumference provides the frame. Glass can be suggested with a drop of clear gloss coat or gloss PVA applied to the dial – once dry, a domed glossy surface remains that imitates a cover glass very faithfully.

Placement and patina

A clock belongs in a visible spot: above a door, above a workbench, on the end wall of a hall. In a devastated interior it is effective to hang it crooked or to leave it fallen on the floor with the dial facing up. A whole interior should be patinated as one, so go lightly over the clock too with dry pastel or a very thin wash, so that it does not look newer than the surrounding wall. Just be careful not to flood the imitated glass with the wash – patinate first and apply the glossy drop only at the end.

Who the sheet is for

  • builders of interior dioramas in 1:35 scale
  • modelers who finish off workshops, offices, railway stations and halls
  • authors of display cases where small details are close to the viewer's eye
  • anyone after a detail that cannot be painted by hand at this scale

It is a printed paper accessory for a diorama. Glue, paints, clear coats and the other material of a scene are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The sheet is a flat print. The clocks gain thickness and a shadow by being backed with a disc of plastic or card.

Best with a punch or a sharp hollow needle of a suitable diameter. A hand cut with a knife is hard to keep true on a small circle.

With a drop of clear gloss coat or gloss PVA. Once dry it forms a domed glossy surface.

It pays off, so that they do not look newer than the surrounding interior. But patinate before you apply the glossy drop.

Last seen

ETA dioramaETA2451:35

1:35 Wall Clocks

1:35 Wall clocks is a printed paper accessory for a diorama in 1:35 scale from ETA diorama, not a kit and not a waterslide decal. The sheet offers printed dials of wall clocks for gluing into interior scenes.
In stock
5.96 €
ELEFANTEL351051:35

1:35 Tow cables eyes for M88, 20 pcs.

Tow cable eyes for the M88 is a resin accessory set in 1:35 scale from ELEFANT, 20 pieces.
In stock
5.56 €
Dead DesignNM320981:32

1:32 AH-64D Apache Takom

Shaped masking templates for the cockpit glazing of a model of the British Supermarine Spitfire Mk. V fighter in 1:32 scale. According to the product name they are cut for the Kotare kit.
In stock
8.76 €
HaulerHLU350961:35

1:35 Dragon?s Teeth tank traps

Concrete antitank obstacles, the so-called dragon teeth, in 1:35 scale. A scenery accessory for a diorama with ground equipment and infantry.
In stock
18.76 €
MiniartMA356541:35

1:35 BOOKSHELVES

MiniArt 1:35 Bookshelves is a plastic detail set of bookshelves with books for enlivening interior dioramas.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.