1:48 Boeing F/A-18F Super Hornet Part 2

The 1:48 Boeing F/A-18F Super Hornet decal sheet, part 2 from the maker Two Bobs is an accessory for a model you have already built, not a kit. It brings markings for the two-seat version of the multi-role carrier aircraft.

Scale1:48
Manufacturer Two Bobs
Product EAN8591111000000

Responsibility details are not available.

11.96 €
9.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Decals 1:48 Boeing F/A-18F Super Hornet, part 2 (Two Bobs)

A standalone decal sheet in 1:48 scale from the American maker Two Bobs. It is not a kit and not a finished model — it is a set of decals with which you mark a model of the two-seat Super Hornet built from a separately sold kit. The designation part 2 means that the sheet follows on from an earlier sheet of the same range and offers a further selection of markings; both sheets are usable independently of each other.

The real subject

The F/A-18F is the two-seat version of the US Navy's multi-role carrier aircraft. Compared with the older Hornet it has an enlarged airframe, a greater wing area, angular air intakes and more powerful engines, which showed in its range and in the weight of the load carried. A weapon systems operator sits in the rear cockpit, so the machine fills both strike duties against ground and surface targets and duties where a second crew member is an advantage. The type forms the backbone of the carrier squadrons and appears in service in a wide range of squadron markings — from sober operational finishes to the strikingly painted machines of unit commanders.

Application tips

Decals belong exclusively on a smooth gloss surface. So spray the finished coat with a thin layer of gloss clear — on matte paint, air is trapped under the carrier film and a silvery edge appears around the motif. Cut the individual motifs out as close to the print as possible, soak them in lukewarm water for only a few seconds and slide them off the backing with a soft brush, not with your fingers. Blot the excess water away with a paper tissue and let the model dry without moving anything further. Finally unify the surface with semi-matte or matte clear according to the look you want.

Who the sheet is for

  • modelers with a two-seat Super Hornet model under construction or finished
  • builders of modern carrier subjects who want markings other than those from the box
  • collectors building several machines of one type side by side
  • more experienced modelers used to working with decals on a divided surface

This is a standalone decal sheet. The kit, paints, clear coats and decal softener are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. The package holds decals only. You build the model from a separately sold kit in 1:48 scale.

The extent of the sheet and the individual schemes are shown on the packaging.

It is not obligatory, but on a divided surface with engraved lines and rivets it helps markedly. It softens the decal and lets it settle into the hollows, so that no bubbles form.

A gloss coat is smooth and will not let air settle under the carrier film. On a matte coat, silvering often appears around a decal.

Last seen

Two BobsTB481031:48

1:48 Boeing F/A-18F Super Hornet Part 2

The 1:48 Boeing F/A-18F Super Hornet decal sheet, part 2 from the maker Two Bobs is an accessory for a model you have already built, not a kit. It brings markings for the two-seat version of the multi-role carrier aircraft.
In stock
11.96 €
Mantis MiniaturesMAN350841:35

1:35 Pin-up Girl & Accessories for bicycles

A resin set, Pin-up Girl and accessories for bicycles , in 1:35 scale from the Polish maker Mantis Miniatures. A genre female figure together with resin accessories for bicycles.
In stock
30.36 €
BrengunBRL1441791:144

1:144 F-104G (Vacu canopy for Revell kit)

Brengun 1:144 F-104G, a vacuum-formed canopy is a replacement clear canopy for the pilot's cockpit with a thin wall and a clear view. The set is cut for the Revell kit and is an accessory, not a model of an aircraft.
In stock
5.16 €
Dead DesignNM721831:72

1:72 F-100C Super Sabre canopy mask (Hasegawa)

1:72 F-100C Super Sabre canopy mask protects the clear parts while the frames are painted. The cut matches the Hasegawa kit.
In stock
7.56 €
SX-ArtSXA20064

Stripes of yellow paper 1,5mm

Yellow masking paper cut into self-adhesive strips one and a half millimeters wide. From one end to the other it keeps the same width.
In stock
4.76 €
New WareNWAM02361:72

1:72 Tu-16K-10 Badger C EXPERT kabuki masks

New Ware Tu-16K-10 Badger C EXPERT kabuki masks 1:72 are accurate self-adhesive painting masks for the cockpit glazing, the other transparent parts and the wheels of the Soviet bomber Tupolev Tu-16.
In stock
7.56 €
CMKCMK43871:48

1:48 Hawker Hunter F.6 Cockpit for ACA

CMK Hawker Hunter F.6 – cockpit 1:48 is a resin cockpit interior set for a model of the British jet fighter Hawker Hunter F.6 in 1:48 scale.
In stock
14.76 €
Amazing ArtAMA1686

ACRYLIC ENAMEL - Patina Green Semi-Gloss 15ml

Amazing Art Patina Green is a semi-gloss acrylic modeling paint in a patina green shade, 15 ml.
In stock
1.16 €
Mf zoneMFZ-TK24641:24

1:24 Speedline Evo Corse Sanremo 18” 12/4

Sanremo wheels, 18 inches (12 spokes, 4 bolts) is a resin set of tarmac racing wheels in 1:24 scale from Mf zone for superdetailing models of rally cars.
In stock
14.36 €
EduardFE13511:48

1:48 F-86D seatbelts STEEL

Eduard STEEL photo-etched colored seat belts for F-86D Sabre models in 1:48 scale bring a cockpit to life with realistic harnesses.
In stock
6 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.