1:144 F-104G (Vacu canopy for Revell kit)

Brengun 1:144 F-104G, a vacuum-formed canopy is a replacement clear canopy for the pilot's cockpit with a thin wall and a clear view. The set is cut for the Revell kit and is an accessory, not a model of an aircraft.

Scale1:144
Manufacturer Brengun
Product EAN8591111275682

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A vacuum-formed canopy for the F-104G, 1:144, Brengun

A clear cockpit canopy vacuum-formed over a mold from thin transparent film. Compared with the injected part from the box it has a much smaller wall thickness, is more transparent and has neither a parting seam nor a gate mark. On a model as small as a Starfighter in 1:144 scale you will notice it at once: the cockpit stops looking like an opaque bubble and the inside can be seen through it. The set is cut for the Revell kit, because the shape of the canopy differs between individual kits of the same aircraft. The same manufacturer also makes a version formed for the Platz and F-Toys kit, so check which kit you are building when ordering.

The real subject

The Lockheed F-104 Starfighter is an American supersonic fighter with an extremely slender fuselage and short, thin trapezoidal wings. The F-104G version was the multirole variant intended for European operators and became the most widespread of the whole family. It is precisely the combination of a long narrow fuselage and tiny wings that gave the aircraft a nickname referring more to a rocket than to a classic fighter. Its cockpit canopy is fairly long and meets the fuselage in one smooth line.

Building and painting tips

A vacuum-formed part is not broken out but cut out. Mark the outline with a thin marker, run a new scalpel blade lightly around the perimeter several times and break the part out. Sand the excess on fine sandpaper laid on a flat board until the edge seats along its whole length. Polish the matte surface left by sanding with polishing paste or with sponges of decreasing grit. It is bonded with a colorless PVA glue for canopies, which dries clear, whereas super glue risks fogging. Mask the frames with thin tape and apply the paint in several weak coats.

Who the accessory is for

  • Builders in 1:144 scale who want a clear view into the cockpit
  • Modelers bothered by a thick and imperfectly transparent part from the box
  • Those looking for a replacement for a damaged or scratched original canopy
  • More experienced modelers used to working with vacuum-formed clear parts

The accessory is supplied unpainted and without the base kit. Glue, paints and masking material are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is formed for the Revell kit. The manufacturer also makes a variant cut for the Platz and F-Toys kit, which is a different item.

At this scale the injected part has a fairly thick wall and a parting seam. A vacuum-formed canopy is thinner and more transparent, so the cockpit can be seen into.

Run a new scalpel blade around the outline in several light passes, never in one heavy cut, and sand the remaining film on fine sandpaper.

A colorless PVA glue for clear parts, which dries clear. Super glue may fog the surface.

Last seen

BrengunBRL1441791:144

1:144 F-104G (Vacu canopy for Revell kit)

Brengun 1:144 F-104G, a vacuum-formed canopy is a replacement clear canopy for the pilot's cockpit with a thin wall and a clear view. The set is cut for the Revell kit and is an accessory, not a model of an aircraft.
In stock
5.16 €
Dead DesignNM721831:72

1:72 F-100C Super Sabre canopy mask (Hasegawa)

1:72 F-100C Super Sabre canopy mask protects the clear parts while the frames are painted. The cut matches the Hasegawa kit.
In stock
7.56 €
SX-ArtSXA20064

Stripes of yellow paper 1,5mm

Yellow masking paper cut into self-adhesive strips one and a half millimeters wide. From one end to the other it keeps the same width.
In stock
4.76 €
New WareNWAM02361:72

1:72 Tu-16K-10 Badger C EXPERT kabuki masks

New Ware Tu-16K-10 Badger C EXPERT kabuki masks 1:72 are accurate self-adhesive painting masks for the cockpit glazing, the other transparent parts and the wheels of the Soviet bomber Tupolev Tu-16.
In stock
7.56 €
CMKCMK43871:48

1:48 Hawker Hunter F.6 Cockpit for ACA

CMK Hawker Hunter F.6 – cockpit 1:48 is a resin cockpit interior set for a model of the British jet fighter Hawker Hunter F.6 in 1:48 scale.
In stock
14.76 €
Amazing ArtAMA1686

ACRYLIC ENAMEL - Patina Green Semi-Gloss 15ml

Amazing Art Patina Green is a semi-gloss acrylic modeling paint in a patina green shade, 15 ml.
In stock
1.16 €
Mf zoneMFZ-TK24641:24

1:24 Speedline Evo Corse Sanremo 18” 12/4

Sanremo wheels, 18 inches (12 spokes, 4 bolts) is a resin set of tarmac racing wheels in 1:24 scale from Mf zone for superdetailing models of rally cars.
In stock
14.36 €
EduardFE13511:48

1:48 F-86D seatbelts STEEL

Eduard STEEL photo-etched colored seat belts for F-86D Sabre models in 1:48 scale bring a cockpit to life with realistic harnesses.
In stock
6 €
Voyager ModelVBS03131:35

1:35 WWII German 88mm L/56 Ammunition(12PCES)(GP)

Voyager Model WWII German 88 mm L/56 Ammunition is a set of twelve turned metal rounds of the German 88 mm gun in 1:35 scale.
In stock
11.96 €
EduardFE9191:48

1:48 P-39 seatbelts STEEL

The photo-etched set P-39 seatbelts STEEL in 1:48 scale from Eduard. Pre-colored steel seat belts for detailing the cockpit of the American Airacobra fighter.
In stock
5.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.