1:48 Messerschmitt Bf 109G-2

1:48 Messerschmitt Bf 109G-2 – masking set (HGW)

This is a set of self-adhesive masking films, not a model on its own. The HGW masks are cut precisely from fine Japanese paper tape, the kabuki type, and they serve to mask the transparent areas when spraying the Messerschmitt Bf 109G-2 fighter in 1:48 scale. They let the canopy frames and the other transparencies be sprayed sharply and with no paint creeping under the edge. The masks are designed to the shape of the matching kit in this scale and they are not intended for the model itself.

The real subject

The Messerschmitt Bf 109G-2 belonged to the early production of the G series, nicknamed the Gustav. It was powered by the Daimler-Benz DB 605 engine and against the F version it offered higher performance as well as armament. The G-2 version lacked the pressurized cabin, unlike the G-1, and it was deployed from 1942 on all the main fronts.

Use and tips

Take the parts off the sheet carefully, transfer them onto a cleaned and degreased transparency and press the edges down carefully so that the paint does not creep under. The masks copy the framing of the canopy, so laborious cutting of tape is unnecessary. Use thin coats of paint on the small areas and lift the mask off while the spray has only just dried. The remaining parts of the sheet can be used to cover the surrounding areas against overspray.

Who the set is for

• Modelers building the Messerschmitt Bf 109G-2 aircraft in 1:48 scale
• Those who want clean and sharp canopy frames without cutting tape by hand
• Beginners as well as advanced builders who want to save time masking transparencies
• Collectors who care about a precise finish on the transparencies

This is an accessory for masking; the kit itself, paints and glue are not included in the package.