1:48 P-51D MUSTANG

1:48 P-51D Mustang is, in this case, an AML masking set — self-adhesive masks cut to shape for the glazing of a model. It is not a kit and not decals.

Scale1:48
Manufacturer AML Decals
Product EAN8591111000000

Responsibility details are not available.

3.56 €
2.94 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

P-51D Mustang 1:48 — an AML masking set

This item is a masking set, that is, a set of self-adhesive masks cut to shape for covering the glazing and other areas while a model of the P-51D Mustang fighter in 1:48 scale is painted. It is not a kit of the aircraft and not a sheet of decals. The masks are made by the Czech brand AML and their point is to replace the slow hand cutting of crepe masking tape: the parts are lifted off the backing, laid on the glass and the canopy framing is sprayed. The resulting frame edges are sharp and even, which shows clearly on the bubble canopy of the Mustang, which has almost no dividing bars.

The real subject

The P-51D was the most widespread version of the North American Mustang fighter. It is marked by a full bubble canopy with a lowered fuselage spine, armament of six 12.7 mm machine guns in the wing, and the license-built Packard Merlin V-1650 engine. Thanks to a large fuel load and drop tanks it was the typical long-range escort fighter, and it saw service over Europe and in the Pacific. Most machines flew in bare metal finish, which on a model places demands precisely on the cleanliness of the masking.

Masking and painting tips

Degrease the glazing first and do not touch it with your fingers — grease reduces the adhesion of both the mask and the finish. Move the mask with tweezers, seat it in place and press the edge down with a toothpick or a wooden stick, so that no paint runs under it. Spray the interior shade of the frames first, and only then the exterior camouflage or metal base. Lay the paint on in thin coats; a heavy coat forms a step that peels off when the mask is lifted. Lift the masks as soon as the paint is dry to the touch — after it has fully cured the edges tear less cleanly. Remove any adhesive residue with a cotton bud damped in water.

Who the set is for

  • Modelers building the P-51D Mustang in 1:48 scale
  • Those who do not want to cut masks from crepe tape by hand
  • Builders who care about sharp canopy frame edges
  • Anyone interested in models in bare metal finish, where every blemish shows

This is a masking set, not a model. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masking stickers for painting the glazing of a P-51D model in 1:48 scale. The kit has to be bought separately.

Ideally shortly after the paint is dry to the touch. Once the finish has fully cured the edge tears away less cleanly.

In ordinary use, usually not. Remove any residue with a cotton bud damped in water, and do not use aggressive solvents on the glass.

The masks are cut to one particular shape of canopy. The fit on any given kit is not stated here, as the shape of the glazing differs between molds.

Last seen

AML DecalsAMLM490391:48

1:48 P-51D MUSTANG

1:48 P-51D Mustang is, in this case, an AML masking set — self-adhesive masks cut to shape for the glazing of a model. It is not a kit and not decals.
In stock
3.56 €
1:32 Boeing PT-17 Kaydet-25 %Stock ClearanceFavorite
EduardJX2541:32

1:32 Boeing PT-17 Kaydet

1:32 Boeing PT-17 Kaydet is a set of pre-cut self-adhesive Eduard masks for the model of the American trainer biplane in 1:32 scale. It is not a kit and not a photo-etched set but a masking accessory for the model.
9 leftof 10
7 €5.24 € You save 1.76 €
AZ modelAZ74511:72

1:72 Bell TH-1G Training Cobra

The plastic kit Bell TH-1G Training Cobra 1:72 from AZ model captures the training version of the Cobra attack helicopter.
In stock
13.96 €
MH modelsMHX481301:48

1:48 Breda Ba.65 canopy airbrush mask

1:48 Breda Ba.65 canopy airbrush mask is a set of spraying masks from MH models for the cockpit glazing of a model of the Italian Breda Ba.65 attack aircraft. It is an accessory, not a kit.
In stock
5.16 €
FujimiFU039221:24

1:24 Toyota Cresta 3.0 Super Lucent

The Fujimi 1:24 Toyota Cresta 3.0 Super Lucent is an injection-molded plastic kit of a Japanese luxury sedan in Super Lucent trim with a 3.0 six-cylinder engine. The model is supplied unassembled and unpainted.
In stock
23.96 €
1:72 McDonnell-Douglas F/A-18 Hornet-25 %Stock ClearanceFavorite
EduardSS6631:72

1:72 McDonnell-Douglas F/A-18 Hornet

A set of photo-etched parts for a model of the McDonnell Douglas F/A-18 Hornet carrier aircraft in 1:72 scale.
2 leftof 4
10.40 €7.80 € You save 2.60 €
Master BoxMB240601:24

1:24 Holy Roller Jordan “Jesus” Jamerson

Holy Roller Jordan Jesus Jamerson is a plastic figure of a truck driver in 1:24 scale from the Truckers line by Master Box.
In stock
10.36 €
Cobra Motor Saturn Green-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-0320

Cobra Motor Saturn Green

Cobra Motor Saturn Green is a green shade from the automotive range of AMMO of Mig Jimenez for the bodies of car and motorcycle models.
2 leftof 4
5.16 €3.88 € You save 1.28 €
SparmaxSPX-GP-50

Spray Gun GP-50 (0,5mm Nozzle)

The Sparmax GP-50 is a pistol-grip airbrush with side feed, fitted with a 0.5 mm nozzle for the quick application of paint to medium and larger areas.
In stock
127.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.