Armory 1:72 B-1B Lancer — a set of resin wheels with weighted tires (late type) is a detailed resin replacement for the landing gear wheels of models of the strategic bomber B-1B Lancer.
Responsibility details are not available.
This set from the manufacturer Armory is not a kit in its own right but a detail accessory — precisely cast resin wheels intended to replace the plastic parts for models of the supersonic bomber B-1B Lancer in 1:72 scale. The tires are made as weighted, with a suggestion of compression where they meet the surface, so the finished model gives the impression of a machine really standing on the runway. The late type designation refers to the rendering of the wheels matching the later service form of the aircraft.
The Rockwell B-1B Lancer is an American strategic bomber with a variable-geometry wing, brought into service in the middle of the 1980s. It carries a considerable takeoff weight, so the rugged main landing gear with its multi-wheel units is among its marked recognition features. Faithfully made wheels therefore lift the look of a finished model noticeably.
First wash the parts in lukewarm soapy water to remove the mold release residue. Cut the casting blocks off with a saw or a sharp knife and clean up the surfaces; protect your airways when sanding resin. Glue the parts with cyanoacrylate glue. We recommend painting the tires a flat dark gray rather than pure black, and the hubs according to period photographs.
The set contains only the resin wheel parts; it is not a model in its own right and contains neither glue nor paints. A matching basic plastic kit is needed to use it.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
