A metal barrel for the Italian 90 mm gun of the 90/53 type with a detailed shield, 1:72 from the Polish maker Aber. A turned barrel backed by a finely worked protective shield.
Responsibility details are not available.
A detail set in 1:72 scale from the Polish maker Aber. It is not a kit of a gun but an accessory for a model of the Italian gun of 90 mm caliber: a turned metal barrel will replace the plastic part, and on top of that a finely worked protective shield is included, which on the real gun is thin sheet with cutouts and stiffeners — a shape that an injection mold can only manage in a simplified form in this scale.
The Italian gun designated 90/53 had a caliber of 90 mm and a barrel 53 calibers long. It started out as an anti-aircraft gun, but thanks to its high muzzle velocity it also proved an exceptionally effective anti-tank weapon, much like the German 88 mm gun. It was deployed as a towed gun and built into self-propelled mountings on chassis and trucks. A tall carriage and a long slender barrel are its typical marks.
Cut the plastic barrel off at the cradle and clean the hole out with a drill. Glue the metal part with cyanoacrylate glue. Separate the shield with a scalpel and make the bends in a photo-etch bending tool or between steel rulers. Degrease the metal before painting and lay down a base coat for metals. Italian vehicles are painted in sand and gray-green shades — on towed guns it pays to add dust and mud to the lower part of the carriage, where it builds up naturally.
This is a detail accessory, not a complete model. Glue, paints and the base model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
