10 mm steel discs for magnetic handle (30pcs.)

10 mm steel discs for a magnetic handle, a package of 30 pieces

A set of thirty steel discs 10 mm in diameter, which make up an accessory for the magnetic handle of the same manufacturer. A disc is glued to the underside of a part or to a temporary support, and the magnetic handle then holds it reliably. It is not a model or a kit but a modeling aid that is used over and over and is gradually consumed.

Use

• Glue a disc to the hidden side of a part, to a wooden stick or to a short support.
• Offer the part up to the magnetic handle, and the magnet will hold it with no clamping and no marks.
• You have the part free on every side, so you can sand it, clean it up and spray it in one go.
• Once the paint is dry, peel the disc off, or leave it on as a handle for further work.
• It suits small parts, figures, wheels, cockpits and small assemblies of resin and metal.

Who the aid is for

Steel discs will be valued by anyone who works with an airbrush and with small parts that cannot be held in the fingers. They find use in painting figures, detail sets and small kit parts. A package of thirty pieces lasts a long time and allows several parts to be prepared for painting at once. The discs are meant for use with a magnetic handle, which is sold separately.

Metal discs have sharper edges, so be careful when handling them and store them out of the reach of small children. Magnets and magnetic handles do not belong near sensitive electronics.