A replacement welded angular gun mantlet and a turned 7.5 cm gun barrel with a muzzle brake of the mid form for the StuG III Ausf. G model in 1:35 scale.
Responsibility details are not available.
The StuG III Ausf. G is the final and most numerous version of the German assault gun built on the chassis of the Pz.Kpfw III tank. The gun is mounted rigidly in a low box superstructure and is aimed by turning the whole vehicle, which was the price paid for a low silhouette. The front of the superstructure went through several forms during production: older machines carried a welded angular gun mantlet, later ones a rounded one. Besides the shield, the muzzle brake of the gun changed as well, so the shield and the brake together reveal which production period a vehicle comes from.
A replacement welded gun mantlet and a 7.5 cm gun barrel ending in a muzzle brake of the mid form, both for a model in 1:35 scale. The barrel is a turned part with an accurate round section along its whole length and an open muzzle; you do not have to glue it together or level out lengthwise production marks on it, which shows at first glance on a part this long and prominent.
Cut the original barrel off a little behind the root, level the cut surface and widen the opening in the front of the superstructure carefully with a round file as needed. Try the assembly dry, check that it is true to the axis from the side and from above, and only then glue it on with a small amount of super glue. Before painting, wash the parts, degrease them and apply a thin coat of primer, as without it the paint holds poorly on a smooth surface.
The vehicle kit, paints and glue are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
