SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:144 GE NOZZLE CLOSED for F-16 (Revell kit)

1:144 GE nozzle in the closed position for the F-16 is a resin replacement part of the engine exhaust nozzle for F-16 models in 1:144 scale. It is not a kit of an aircraft but a detail accessory. Target kit: Revell.

Scale1:144
Manufacturer Rise144models
Product EAN8591111366373

Responsibility details are not available.

3.96 €
3.27 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A General Electric engine nozzle in the closed position for the F-16 1:144 (Rise144models)

A resin accessory from Rise144models. It replaces the engine exhaust nozzle on an F-16 Fighting Falcon model and renders it in the closed position, that is, in the state the nozzle is in on a parked aircraft. It is not a kit of an aircraft but a single, though very visible, detail. The target kit is Revell.

The real subject

The F-16 was fitted during production with engines from two different makers, and the nozzle is precisely the place where that can be told at first glance: the petals have a different shape, a different number and a different spacing. The General Electric nozzle has a characteristically divided outer shroud and its position also changes with the engine setting: at full power it opens out, and after shutdown the petals draw in to a narrow cone. It is this closed shape that belongs to an aircraft standing on the apron, whereas kits tend to be molded with the nozzle open. The mix-up is one of the most commonly overlooked discrepancies on F-16 models.

Building and painting tips

The part is hollow and thin-walled, so when cutting it from the casting block proceed slowly with a sharp blade and never press against the wall of the nozzle. Keep sanding to a minimum and concentrate it only on the mating surface to the fuselage. After washing off the mold release agent and drying, apply a primer. It is bonded with super glue applied with the tip of a wire around the circumference of the mating surface, not inside the nozzle. Painting is the more interesting half of the work on a nozzle: a base in a metallic shade, a darker tone inside, and thin casts of heat discoloration on the outer petals. It pays to work with very thinned paint and in several coats, because in 1:144 the line between an effect and overpainting is very thin.

Who the accessory is for

  • Builders of the F-16 in 1:144 scale who want the correct variant of the nozzle.
  • Modelers building a parked aircraft on the flight line.
  • Collectors bothered by the simplified nozzle from an ordinary kit.
  • More experienced modelers used to small resin parts.

The accessory is supplied unassembled and unpainted. The model of the aircraft, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The petals of the nozzle open out according to the engine setting. The closed position corresponds to an aircraft with the engine shut down on the flight line, the open one to an aircraft running.

The engines of the two different makers differ on the F-16 in the shape and division of the nozzle petals. Before buying, compare the shape of the nozzle with photographs of the particular aircraft you are building.

It is not. It is the exhaust nozzle, that is, the visible end part that replaces the part from the kit.

With metallic shades in several thinned coats and a darker tone inside. Suggest the heat discoloration only discreetly, as it is easily overdone in 1:144.

The target kit is Revell. The cut and the dimensions are based on it, and on a different mold the shapes may differ.

Last seen

Rise144models144RM0281:144

1:144 GE NOZZLE CLOSED for F-16 (Revell kit)

1:144 GE nozzle in the closed position for the F-16 is a resin replacement part of the engine exhaust nozzle for F-16 models in 1:144 scale. It is not a kit of an aircraft but a detail accessory. Target kit: Revell.
In stock
3.96 €
New WareNWAM10511:48

1:48 B-17F Flying Fortress camouflage details painting mask

B-17F Flying Fortress - camouflage detail masks 1:48 from New Ware. Masks for spraying the details of the camouflage accurately.
In stock
4.76 €
Yamamoto Model PartsYMP35161:35

1:35 Pumpkin Set

Pumpkin Set in 1:35 scale from Yamamoto Model Parts is a set of pumpkins for a diorama, meant to bring country and autumn scenes to life.
In stock
4.76 €
DUAL EXO 18B – NCC GREY 60ML.-25 %Stock ClearanceFavorite
AK interactiveAK1536

DUAL EXO 18B – NCC GREY 60ML.

Dual Exo 18B NCC Grey is an acrylic modeling paint from the AK Interactive brand with a satin, that is semi-gloss, degree of sheen. The gray shade is listed in the range under the number 18B and the name NCC Grey.
5 leftof 6
4.76 €3.56 € You save 1.20 €
Number FiveN5-C210

DS3 WRC White

The white DS3 WRC White from Number Five matches the basic white on which the livery of the Citroën DS3 WRC rally car rested.
In stock
5.96 €
BlackSnake ModelK-051:35

1:35 French WWII Commando Kieffer - Soldier 5

A commando in full field equipment. The Commando Kieffer - Soldier 5 set holds one figure in 1:35 scale from BlackSnake Model.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.