A plastic kit of a modified dragster under the designation Infini-T in 1:25 scale. It is supplied unassembled and unpainted.
Responsibility details are not available.
A dragster is a single-purpose car for acceleration races on a straight track: a long narrow frame, small front wheels, wide driven wheels at the rear and an exposed powerplant. The custom epithet means that the car came about as an individual modification, not as a production version, and cars like that were often built as much for shows as for the track. The real subject is listed under the designation Infini-T.
The plastic parts of the model in 1:25 scale and the documentation for finishing it. The assembly consists of the frame, the powerplant, the wheels, the seat and the body; the exact range of parts, any variants of the build and the recommended shades are given in the instructions enclosed with the package.
A straight frame is the foundation, so assemble it first and let it cure thoroughly on a flat surface. Nip the parts off a little away from the joint and sand the remainder, so the mating surfaces stay clean. With an exposed powerplant it pays to paint the individual groups of parts separately before gluing, because once assembled a brush will not get to them. Prepare the body for a gloss: fill the joints, go over the surface with fine paper and apply the paint in thin coats.
The paints, the glue and the filler are not included in the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
