1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

16.16 €
Add to Cart

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

Interior decals in 1:32 scale for early F-15C, F-15A and F-15J aircraft, the small version of the set. They are applied over a gloss base and replace the flat parts of the kit. The set is intended for the Tamiya kit.

Scale1:32
Manufacturer Quinta Studio
Product EAN8591111427098

Responsibility details are not available.

21.56 € 16.16 €
13.36 € without VAT
−25 % You save 5.40 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F-15C Early, F-15A and early F-15J - interior decals 1:32, small version

This is a colored interior decal set for a model of the F-15 in 1:32 scale in the small version, intended according to its name for early F-15C, F-15A and early F-15J aircraft. Small version is a designation from the product name and distinguishes it from the full set of the same subject. It is not a model and not a kit but an accessory for finished, painted parts. The target kit is Tamiya.

The real subject

The F-15 Eagle is a twin-engine single-seat fighter with a large wing area and a pair of vertical tails. The A version is the original single-seat form, the C its later development and the F-15J the licensed Japanese variant. The early cockpit has a different instrument layout from the later form, which is why the sets are divided into early and late.

How the set is applied

The basis is a smooth and gloss surface. Coat the painted part with gloss clear and let it dry thoroughly. Release the decal after about fifteen seconds in lukewarm water, move it into place, line it up and blot the water away. Do not use a decal softener or a decal fixer, as the chemicals attack the printed resin and ruin the part; do not touch the part until it is dry. Seal the finished interior with a clear coat in the degree of sheen you choose.

What the set does on the model

The set replaces the flat parts of the kit: instead of suggested relief you get a colored surface with a three-dimensional impression, and painting the smallest details is no longer needed. Degrease the plastic before applying and level any coarser relief so that the decal beds down without bubbles.

Who the set is for

  • For builders of early F-15 versions in 1:32 scale who are content with a smaller scope
  • For modelers building the model with the canopy closed
  • For those who want a colored interior quickly and without painting
  • As an accessory for a kit, not as a standalone model

The set is an accessory for a kit, not a standalone model. Paints, glue and clear coats are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For early F-15C, F-15A and early F-15J aircraft. A separate set is made for the late cockpit configuration.

A smaller variant alongside the full set of the same subject.

Apply them over gloss clear and blot the excess water away, and do not use a decal softener or a decal fixer. Silvering is caused by air trapped under the film.

It is recommended. An overcoat evens out the sheen of the whole interior and protects the decal mechanically.

The target kit is Tamiya. The cut and the dimensions are based on it, and with a different mold the shapes may differ.

Last seen

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS321551:32

1:32 F-15C Early/F-15A/F-15J early 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

Interior decals in 1:32 scale for early F-15C, F-15A and F-15J aircraft, the small version of the set. They are applied over a gloss base and replace the flat parts of the kit. The set is intended for the Tamiya kit.
2 leftof 6
21.56 €16.16 € You save 5.40 €
BlackSnake ModelUSMC-121:35

1:35 US Marines 12 - Operation Iraqi Freedom

BlackSnake Model 1:35 US Marines 12: Operation Iraqi Freedom is a resin 3D printed figure of a modern American marine for a diorama in 1:35 scale.
In stock
11.96 €
C-1568

mini van

In stock
9 €
BlackSnake ModelSOVIET-041:35

1:35 Red Army WWII Soldier No.1 (1 Figure)

1:35 Red Army WWII Soldier No.1 is a resin, 3D-printed figure of a Soviet Red Army infantryman for a diorama. One figure, intended for experienced modelers.
In stock
11.96 €
DN ModelsDN32/827-0761:32

1:32 B-17G Flying Fortress Yellow Tails Insignia Paint Mask Set

1:32 B-17G Flying Fortress Yellow Tails Insignia Paint Mask Set contains three sheets of masks for the marking of three particular Flying Fortresses of the Eighth Air Force.
In stock
29.96 €
Quinta StudioQD321571:32

1:32 F-15C Late/F-15J late 3D-Printed & coloured Interior on decal paper (Tamiya)

A relief colored 3D interior decal Quinta Studio F-15C Late / F-15J late in 1:32 scale for a faithful cockpit of the Tamiya kit.
In stock
35.16 €
SX-ArtSXA481721:48

1:48 Junkers F-13 double sided mask (MINA)

A double-sided masking set 1:48 for the glazing of the historic Junkers F 13 transport aircraft. It holds shapes for the outer and the inner face of the windows, so the frames come out clean from both views.
In stock
9.16 €
Vertigo miniaturesVMS042-1

In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.