Stripes 2,0 mm (135x90mm) Oramask foil

Masking strips 2.0 mm on a 135 x 90 mm sheet

A universal masking sheet from the brand Omask with pre-cut straight strips 2.0 mm wide. The material is self-adhesive Oramask masking foil. It is not a set cut to the outline of a particular kit but a stock of strips from which you take exactly as many as you need at the time. A width of 2.0 mm is the widest of the sheets offered and is used for prominent bands, trim and dividing lines over large areas. The line offers the same sheets in widths from 0.6 to 2.0 mm, so you can put a set together to match the scales you build in.

Use

• the widest strips in this line, for prominent bands and trim
• stripes on a hood, on a fuselage and along the sides of a cargo bed
• dividing lines over large areas in bigger scales
• masking long straight edges in a single piece
• covering narrower parts across the whole width of the strip

How to work with the strips

Lay the strip onto a perfectly dry and smooth coat; masking should not be done over fresh paint, because it tears when the mask is lifted. Once it is on, press the edge home thoroughly, with a wooden toothpick for instance, so no paint runs under it. Spray in thin layers and preferably in several passes, since a heavy layer leaves a noticeable step at the edge. Lift the foil shortly after the paint has set, slowly and at a shallow angle away from the masked edge. On rounded areas it is better to lay the strip in shorter sections than to force it into a curve.

Who the sheet is for

• modelers who spray multi-color camouflage with a sharp transition
• builders of cars and motorcycles with lines and stripes on the bodywork
• anyone who does not want to cut straight strips from masking tape by hand
• work with an airbrush as well as a brush; the sheet is not tied to one technique

The package holds masking material only. Paints, varnish, the model and tools are not part of it. On a delicate coat, test the adhesion on a hidden area first.