A translucent blue paint for toning clear parts and glossy surfaces. The shade is built up by coats, not by covering power.
Responsibility details are not available.
A translucent paint differs from a covering one in that it does not hide the base, it only tints it. A blue translucent shade therefore suits glazing, the lenses of position and landing lights, beacons and reflectors, and everywhere you are meant to see through. The second major use is on a metallic glossy base: under a translucent coat the gloss of the base stays legible and the surface takes on the color cast of a painted car body or of tempered metal.
Shake the bottle properly before work. The shade is built up by the number of coats, not by the strength of one of them, so apply thinly and let the surface become tacky between coats; after every coat the tone is a little more saturated and there is no way back. The base should be smooth and glossy, because every matte irregularity is emphasized under a translucent coat. Choose the thinner and the thinning ratio according to the manufacturer's instructions on the packaging, both for a brush and for an airbrush; an airbrush gives a more even result on large areas than a brush.
Try the saturation first on a piece of scrap plastic with the same base as you have on the model. On clear parts work with a small amount of paint, so that the edges and the frames of the glazing are not flooded.
The thinner, brushes and the model are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
