A kit of the two-axle trailer for transporting a car in 1:24 scale from the French manufacturer Heller offers a choice of rims and of the position of the loading ramps.
Responsibility details are not available.
A plastic kit of a two-axle trailer meant for taking a passenger car away. Heller is a French manufacturer, and this model rounds out its line of vehicles in 1:24 scale. The set offers a choice of two types of rim, including a spare wheel, and allows the loading ramps to be built both folded and in the position for loading.
Various versions of the drawbar are included as well, so the trailer can be hitched to other models from the brand in the same scale. The design allows for the cable runs to the rear lamps and for the braking system, that is for details usually left out on trailers. Besides the plastic parts, the package holds rubber parts, water-slide decals and building instructions.
Assemble the chassis and the axles and dry-fit them before you glue anything. This is where it is decided whether the trailer will stand straight. Leave the ramps free until the end so that both positions stay open to you. The deck benefits from light soiling and worn patches along the line of the wheels; otherwise it looks brand new. Decals settle better on a gloss coat of varnish.
The kit is supplied unassembled and unpainted. Glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
