1:32 A-1H Skyraider 3D-Printed and coloured Interior on decal paper

1:32 A-1H Skyraider 3D-Printed and coloured Interior on decal paper

26.76 €
Add to Cart

1:32 A-1H Skyraider 3D-Printed and coloured Interior on decal paper

Color Quinta cockpit interior elements for a model of the A-1H Skyraider in 1:32 scale. They are applied like a decal, with a short soak in lukewarm water; do not use a decal softener with them.

Scale1:32
Manufacturer Quinta Studio
Product EAN8591111000000

Responsibility details are not available.

26.76 €
22.12 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Douglas A-1H Skyraider is an American single-seat carrier ground-attack aircraft with a piston radial engine. It entered service only after the Second World War and, at a time when jets were multiplying around it, it kept its place by what the jets could not do: it could stay over the target considerably longer and carry a larger load of armament under its wings than the jets of the day. In the large 1:32 scale its roomy cockpit under the sliding canopy is visible through the glazing into every corner.

What the set contains

Color cockpit interior elements for 1:32 scale from the Quinta brand. They are printed, they have a raised relief and they are seated directly on the kit parts, so they replace hand painting of the instruments and the side panels. They are applied like a decal: the part is cut out, soaked briefly in lukewarm water and slid off the paper into place; do not use a decal softener with them. They have no adhesive layer of their own and hold on a gloss varnish. The extent of the set and the placing of the individual elements are stated in the manufacturer's instructions.

Building tips

The surface must be smooth, clean and coated with a gloss varnish of the Future, Klear or Tamiya X-22 type; on matte paint the element will not hold. Separate the part with a scalpel and after soaking carry it with tweezers. Slide it on by one edge first, align it with the edges of the part and only then press it gently with a cotton bud from the center outwards, so that no air stays underneath; in broken-up places a drop of cyanoacrylate glue will help. Finish the interior before you glue the fuselage halves together, because later you will not get into the cockpit.

  • a color cockpit interior in 1:32 scale, the Quinta brand
  • printed elements with a raised relief
  • applied with a short soak in lukewarm water; do not use a decal softener
  • the paper under the elements is only a backing, off which the element slides after soaking
  • stick them on before closing the fuselage of the model

Terms of supply

The aircraft kit, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, briefly. Cut the element out, leave it in lukewarm water for about fifteen seconds and slide it off the backing paper into place. Do not use a decal softener with it.

Color cockpit interior elements in 1:32 scale. Their extent and placing are stated in the manufacturer's instructions. The aircraft kit is not included.

Coat the surface with a gloss varnish, carry the soaked element with tweezers, slide it on by one edge and press it down with a cotton bud from the center toward the edges.

Before the fuselage halves are glued together. Once it is closed you will not get into the cockpit and the elements could not be seated.

Last seen

Quinta StudioQD320641:32

1:32 A-1H Skyraider 3D-Printed and coloured Interior on decal paper

Color Quinta cockpit interior elements for a model of the A-1H Skyraider in 1:32 scale. They are applied like a decal, with a short soak in lukewarm water; do not use a decal softener with them.
In stock
26.76 €
Mr.PaintMRP138

WWII US - Olive Drab ANA613 (after 1943)

Mr.Paint MRP-138 WWII US Olive Drab ANA 613 (after 1943) is a pre-thinned acrylic lacquer for an airbrush in a 30 ml bottle, the olive green upper camouflage of American aircraft of the Second World War after 1943.
In stock
5.96 €
PeewitPWM721041:72

1:72 Fokker D.XXI 4. sarja - pro modely Special Hobby

Masking set for the Fokker D.XXI 4th series is a die-cut self-adhesive set of masks in 1:72 scale from Peewit. It is not an aircraft model but an accessory for accurate masking during painting. It is supplied as a set of masks.
In stock
5.16 €
ŘOP o.s.F1000/0681:1000

1:1000 T-S 44 ,,Na pahorku,,

1:1000 T-S 44 Na pahorku is a model of an object of the Czechoslovak fortifications in 1:1000 scale from ROP o.s. It is supplied as a kit to be assembled and painted.
In stock
4.36 €
AiresAIR74061:72

1:72 F-4E Phantom II exhaust nozzles - Fire Molds kits

Exhaust nozzles for the F-4E Phantom II in 1:72 scale from Aires. A resin accessory set, not an aircraft model.
In stock
20.80 €
HaulerHLM350011:35

1:35 Schwere HAUBITZE 42cm SKODA M.17(t)

The heavy howitzer 42cm Skoda M.17(t) in 1:35 scale is a resin kit with etched parts for experienced modelers from the Czech maker Hauler.
In stock
125.96 €
1:32 North-American P-51D Mustang TFace-25 %Stock ClearanceFavorite
EduardJX2841:32

1:32 North-American P-51D Mustang TFace

Double-sided TFace masking sets 1:32 for the North American P-51D Mustang from Eduard hold masks for the outer and the inner side of the glazing. It is an accessory to a kit, not a model in its own right.
5 leftof 6
10.40 €7.80 € You save 2.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.