1:32 Dassault Mirage IIIC exhaust nozzle

The Reskit exhaust nozzle for the Dassault Mirage IIIC in 1:32 scale is a resin accessory that replaces the simplified part from a kit. It is not a model of the aircraft.

Scale1:32
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

18.36 € 13.76 €
11.37 € without VAT
−25 % You save 4.60 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Reskit exhaust nozzle for the Dassault Mirage IIIC in 1:32 scale

A resin replacement for the exhaust nozzle for a model of the French delta aircraft, not a stand-alone kit. The Mirage IIIC has a fuselage that ends in a relatively large nozzle surrounded by the surfaces of the rear end, so it is a place the viewer looks at among the first. The casting offers thin edges and genuine depth, which a two-part plastic ring cannot manage.

The real subject

The Mirage IIIC is a single-engine supersonic aircraft with a tailless layout and a delta wing, that is with no horizontal tail surfaces. Propulsion is provided by one jet engine with an afterburner, and its exhaust nozzle is therefore on the axis of the fuselage, as one whole with the rear end. Within the Mirage III family the IIIC version is one of the earlier ones and differs from the later machines in details of equipment, which is worth keeping in mind when choosing accessories.

Usage and painting tips

Before you reach for the glue, try seating the part dry in the fuselage. Resin can be fine-tuned with abrasive paper more easily than plastic, but fine-tuning after cyanoacrylate glue has set is unpleasant. Wash the casting free of release agent, apply a primer and paint it separately before installation. Apply the metallic shades in thin coats; the depth comes from leaving the interior darker and bringing only the edges out with a lighter metal. Finally run a thin wash along the transition from the nozzle to the fuselage, so that the joint reads as a structural gap rather than a glued seam.

Who the part is for

  • Builders of the Mirage IIIC in the large 1:32 scale
  • Modelers who detail the rear end and want a faithful nozzle
  • Those who are ready to take on metallic shades and fine transitions
  • More experienced modelers working with resin

The accessory is supplied unpainted. The set is cut for the particular kit named by the manufacturer; please check before buying that it matches the model you are building. The base kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to its name it is intended for the IIIC version. The individual versions differ in details, so please check that it matches your kit before buying.

No, it is the exhaust nozzle. The exact extent of the parts is given on the box of the set.

Resin can easily be fine-tuned with abrasive paper before gluing. Once cyanoacrylate glue has set, any correction is considerably more difficult.

Metallic shades in thin coats. Leave the interior darker, bring the edges of the petals out with a lighter tone and run a fine wash along the joint with the fuselage.

Last seen

1:32 Dassault Mirage IIIC exhaust nozzle-25 %Stock ClearanceFavorite
ReskitRSU32-00261:32

1:32 Dassault Mirage IIIC exhaust nozzle

The Reskit exhaust nozzle for the Dassault Mirage IIIC in 1:32 scale is a resin accessory that replaces the simplified part from a kit. It is not a model of the aircraft.
2 leftof 3
18.36 €13.76 € You save 4.60 €
AFV ClubAFV351391:35

1:35 38cm RW6-1 L/5.4 Assault Rocket for Sturmtiger

The AFV Club 1:35 — 38 cm RW6-1 L/5.4 rocket projectiles for the Sturmtiger is a detail addition with faithful rocket projectiles. It is not a vehicle kit, but an ammunition set.
In stock
9.96 €
Exotic DecalsEXOT720021:72

1:72 Me 110 Razarac in Yugoslav service

Exotic Decals 1:72 Me 110 Razarac in Yugoslav service is a decal sheet with the markings of the Messerschmitt Bf 110 heavy fighter in Yugoslav colors.
In stock
8.76 €
Kits-WorldKW3D124027

TRS Racing Nascar Superlite 6-Point Harness (Yellow)

Printed items depicting the TRS Racing NASCAR Superlite six-point racing belt in a yellow version.
In stock
11.16 €
Evolution MiniaturesEM351371:35

1:35 Soviet Soldiers I 1943-1945

A resin figure set, Evolution Miniatures Soviet Soldiers I 1943–1945 in 1:35 scale , depicts Soviet soldiers of the late phase of the Second World War. Collector's figures for a diorama.
In stock
17.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.