29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:32 DH.100 VAMPIRE - MASKS

1:32 DH.100 Vampire - masks is a masking set from HGW for the first-generation British jet aircraft with twin tail booms. It is not a model of the aircraft but self-adhesive masks that make spraying the glazing of a model in 1:32 scale easier.

Scale1:32
Manufacturer HGW
Product EAN8591111248648

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

de Havilland DH.100 Vampire 1:32 - an HGW masking set

This item is not a kit of the aircraft. It is a masking set for a model of the British Vampire jet aircraft in 1:32 scale. The pre-cut self-adhesive masks are stuck onto the clear parts, the paint is sprayed over them and once they are lifted a crisp boundary stays between the frame and the glazing.

Why it pays off on the Vampire - the cockpit canopy is rounded and clean in shape, which when cutting tape by hand means a lot of laborious copying of curves. A pre-cut mask does away with that step and, above all, removes the risk of scratching the clear part with a scalpel, as it practically cannot be repaired.

The real subject

The de Havilland DH.100 Vampire was a first-generation British single-engine jet aircraft that flew while the Second World War was still on and entered service shortly after it. Characteristic is the layout with a short fuselage nacelle and a pair of tail booms, which shortened the exhaust duct and reduced the losses of the jet engine of the day with its centrifugal compressor. The Vampire became one of the most widespread aircraft of its generation and served in many countries, often in the two-seat trainer form as well.

Use and tips

Wash and degrease the clear parts. Move the masks with tweezers and press them down with a blunt point, giving them more time on the curved areas. Spray thin coats; one heavy coat will leave a step at the edge. Lift the mask off while the paint is dry only to the touch. With postwar machines with a smooth finish it pays to polish the clear parts before masking and to go over them with gloss varnish; the edge then comes out even cleaner.

Who the set is for

  • Modelers building a Vampire in 1:32 scale.
  • Those who want crisp cockpit frames without cutting tape by hand.
  • Builders of early jet machines and of postwar air forces.
  • Modelers working with an airbrush in a large scale.

The masks are an accessory for a kit. The kit itself and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a masking set, an accessory for a kit. A Vampire kit in 1:32 scale has to be obtained separately.

The solution shortened the exhaust duct of the jet engine of the day with its centrifugal compressor and so reduced the loss of thrust. The tail surfaces therefore moved onto booms outside the fuselage nacelle.

Degrease the part, press the mask down carefully above all on the curves and spray several thin coats instead of one heavy one.

The masks are cut to the shapes of a particular kit. So check the compatibility against the model you are building.

Last seen

HGWHGW6328601:32

1:32 DH.100 VAMPIRE - MASKS

1:32 DH.100 Vampire - masks is a masking set from HGW for the first-generation British jet aircraft with twin tail booms. It is not a model of the aircraft but self-adhesive masks that make spraying the glazing of a model in 1:32 scale easier.
In stock
7.96 €
AiresAIR45031:48

1:48 Ar 196A-5 cockpit set

Aires Ar 196A-5 — resin cockpit (1:48) . A detail resin set of the cockpit interior for a plastic kit of the German shipboard reconnaissance floatplane.
In stock
29.60 €
1:48 F-4N-25 %Stock ClearanceFavorite
EduardBIG49611:48

1:48 F-4N

Eduard 1:48 F-4N Big Ed is a set of refining accessories for building a model of the American F-4N Phantom II fighter. It brings several Eduard photo-etched and masking sets together in a single box. It is not an aircraft model but a collection of accessories.
Last one!
25.32 €19 € You save 6.32 €
TamiyaTA126741:6

1:6 Assembly Chain Set for 1:6 Scale Motorcycle

The Tamiya assembly chain for 1:6 motorcycles is a detail accessory that replaces the solid chain of the model with a genuinely movable link chain. It is not a motorcycle model.
In stock
29.96 €
OmaskOMK7481411:48

1:48 P-39 Airacobra wheel bay plugs (for Hasegawa / Hobby 2000)

Omask 1:48 P-39 Airacobra — wheel bay plugs of flexible foam, shaped for the Hasegawa and Hobby 2000 kits. It is not a kit — it is a masking accessory, and you have to have the model.
In stock
3.20 €
NARUTO GAARA (AH36906)-25 %Stock ClearanceFavorite
BandaiBAN36906

NARUTO GAARA (AH36906)

A collector item with the character Gaara from the world of the Japanese series Naruto. For the size, the finish and the extent of the package, the data on the box are binding.
Last one!
27.16 €20.36 € You save 6.80 €
Aires/QuickboostQB323001:32

1:32 OV-10A/D Bronco steps

Quickboost 1:32 OV-10A/D Bronco - boarding steps is a tiny resin set that replaces or completes the boarding elements on a model of the OV-10 Bronco aircraft in 1:32 scale.
In stock
6.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.