1:32 L-39 Albatros wheels set

1:32 L-39 Albatros wheels set is a resin wheel set for a kit of the L-39 Albatros trainer in the large scale. It is not a model but replacement landing gear parts.

Scale1:32
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

13.16 € 9.88 €
8.17 € without VAT
−25 % You save 3.28 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wheel set for the L-39 Albatros in 1:32 scale

This resin wheel set from Reskit is an accessory with which the plastic wheels from the box are replaced on a model of the Aero L-39 Albatros jet trainer in 1:32 scale. Wheels are among the parts that are seen from close up on a finished model and at the same time get the least care in kits. The mold parting line here often runs straight across the tread of the tire and the hub tends to be merely suggested. A resin replacement gets around those problems, because it is cast by a different process and both the tread and the hub detail stay legible.

The real subject

The Aero L-39 Albatros is a jet trainer of Czechoslovak design from the Aero Vodochody works. It first flew in the late 1960s and became the most widespread machine of its kind in the Eastern bloc; later it spread to other countries as well and still serves today with a number of operators, including civilian ones. It is powered by a turbofan engine and the machine is built for intensive training use, which is matched by rugged nosewheel landing gear with a single wheel and main gear retracting into the fuselage.

Building and painting tips

Separate the wheels from the casting block with a thin saw and sand the remainder so that the contact surface for the axle is flat. Before painting, wash the whole set in lukewarm soapy water, which removes any mold release agent. Glue the resin with cyanoacrylate. The tire and the hub are dealt with separately, so first spray the whole wheel in the tire shade, then mask the hub off or paint it in with a brush. Leave the flat surface of the tire genuinely flat, as gloss in this place gives a model away at once. Check too whether the new wheels change the ride height of the model compared with the original plastic ones.

Who the set is for

  • builders of L-39 Albatros models in the large 1:32 scale
  • modelers bothered by the parting line across the tread of a tire
  • anyone after realistic landing gear detail on a display model
  • anyone up for working with resin and cyanoacrylate

The accessory is supplied unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes, it is a replacement for the original plastic wheels. Before gluing, check that the axle stub on your model matches the hole in the resin part.

Plastic wheels tend to have the parting line running across the tread of the tire and soft hub detail. A resin replacement does not have those faults.

First the whole wheel in the tire shade, then the hub separately. Leave the tire flat, as a glossy surface reads as unconvincing.

Rather not. It calls for cutting off the casting block, sanding and gluing with cyanoacrylate, that is procedures beyond an ordinary plastic kit.

Last seen

1:32 L-39 Albatros wheels set-25 %Stock ClearanceFavorite
ReskitRS32-02101:32

1:32 L-39 Albatros wheels set

1:32 L-39 Albatros wheels set is a resin wheel set for a kit of the L-39 Albatros trainer in the large scale. It is not a model but replacement landing gear parts.
Last one!of 4
13.16 €9.88 € You save 3.28 €
AiresAIR43421:48

1:48 Harrier GR Mk.7 cockpit set

A resin detail set of the cockpit for the Harrier GR Mk.7 in 1:48 scale from Aires . An accessory for a more faithful cockpit interior, not an airplane model.
In stock
16.80 €
RT-DioramaRT357691:35

1:35 Gothic stained glass windows (Typ3)

In stock
8.76 €
FujimiFU762311:76

1:76 JGSDF Type 74 (BATRA)

In stock
25.96 €
EduardED3DL482541:48

1:48 P-47D Razorback SPACE for Miniart

Eduard P-47D Razorback SPACE, 1:48 is a detail SPACE set — a colored 3D cockpit decal complemented by steel photo-etched parts and harnesses. It is not a kit — it is intended for the P-47D Razorback model from MiniArt in 1:48 scale.
In stock
12.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.