1:32 RAAF F-111 pilots sitting in seats (2 pcs) for RESKIT RSK32-0002 kit

RAAF F-111 pilots sitting in seats 1:32

This accessory is NOT an aircraft model but a set of two crew figures in 1:32 scale. The figures are 3D printed from resin and capture a pair of Royal Australian Air Force (RAAF) pilots sitting in their seats, that is, in the position for fitting into the cockpit or escape module of a large F-111 model. They liven up the interior and give the resulting diorama or model scale and a story.

What the set contains

• two 3D-printed resin figures of pilots in a seated position
• adapted for F-111 models in 1:32 scale
• figures worked out in detail in flight gear

Usage tips

First wash the parts free of residual uncured printing resin, carefully separate the print supports and deburr them. Glue with cyanoacrylate glue (super glue). Before painting apply a primer, then paint with a brush, concentrating on the faces, helmets and harnesses. Before the final assembly check how the figures seat in the particular seat or cockpit.

Who the set is for

• builders of large aircraft models in 1:32
• makers of dioramas and scenes with a crew
• modelers who want to liven up the interior of a cockpit

This is an accessory intended for further work. The aircraft model, glue and paints are not included in the package.