The Land Rover 88 mask in 1:35 scale is a set of cut masking templates for the glazing and framing of a model of the British off-road vehicle.
Responsibility details are not available.
A set of cut masking templates for a model of the British Land Rover off-road car with the short wheelbase in 1:35 scale. It is not a kit but an accessory for the build, which masks the glazed areas and the framing before spraying. The cut matches the kit from AK Interactive.
The Land Rover with the 88 inch wheelbase is the shorter of the two basic versions with which the brand supplied armies and civilian users for decades. It is a simple utility vehicle with an aluminum body on a frame, four-wheel drive and sparse equipment. In army service it served as a liaison and reconnaissance vehicle, but also as a weapons carrier and the basis for a whole range of modifications.
Lay the mask on a degreased, dry part and press the edge down with a blunt tip. Spray the paint in several thin coats so that it does not creep under the edge. Remove the mask soon after it has dried and pull it off at an angle along the surface, not straight up. On a vehicle with square windows, test first which mask belongs on which pane, as the shapes are similar. The framing stands out well if the interior color is sprayed on first.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
