1:35 Gothic Fence (short)

Gothic Fence (short) 1:35 (RT-Diorama)

This is a 3D-printed diorama accessory from RT-Diorama in 1:35 scale, the shorter variant of a wrought iron fence in the Gothic style. The decorative vertical bars with spikes and horizontal rails suit historical and urban scenes, buildings, cemeteries, parks and courtyards. The fine 3D print captures the crisp profiles of the bars, which would be hard to form in another technology.

Use

• An accessory for dioramas and display scenes; it is not a vehicle kit or a figure.
• Clean the print supports off and lightly sand the seating faces if needed.
• Bond with super glue (cyanoacrylate); for a firm anchorage, drill holes in the base.
• Paint it in metallic, rusty or dark shades; adding a wash and pigments will give it age and patina.

Who it is for

• Makers of dioramas and scenic settings in 1:35 who want a faithful decorative fence.
• Modelers used to working with resin and 3D-printed parts.

The accessory is supplied unpainted and without glue. Paints and glue are not included in the package, unless stated otherwise.