1:35 Large Stone arch bridge - extension is an extension of the stone arch bridge of the brand RT-Diorama for dioramas in 1:35 scale.
Responsibility details are not available.
This is not a kit of equipment but a diorama building element of the brand RT-Diorama. According to the name it is an extension to the subject of the large stone arch bridge in 1:35 scale, that is a part that follows on within the same architectural line.
Large structures are only rarely handled in a diorama with a single piece. A modeler seldom knows in advance how long a scene will be and how much room a display case will allow. Putting it together from parts that follow on therefore gives freedom: a bridge can be drawn out over a wider channel, adapted to the depth of the base or on the contrary shortened. At the same time it means that a scene can be built up gradually, part by part and according to the budget, instead of arising all at once.
The most sensitive place is always the joint between the individual parts. Try the join dry before you set about painting and hide any division where it looks natural: in the shadow of the vault, at a pier or under vegetation. Mix the paint for the whole bridge at once and apply it to all the parts in one sitting, otherwise the shades will drift imperceptibly apart and the boundary will show. Bring the joints between the blocks out with a dark wash and the edges on the contrary with a light dry brush. Run the aging and the moss smoothly across the division, so that the reading of the scene does not catch anywhere.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
