20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:35 M114 early & late type w/ interior

A plastic kit of the M114 armored reconnaissance vehicle in 1:35 scale from Takom offers, according to its name, both the early and the late version and a well worked interior.

Scale1:35
Manufacturer Takom
Product EAN8591111020183

Responsibility details are not available.

37.96 €
31.37 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

M114, early and late version, with interior 1:35 (Takom)

An injection molded plastic kit from the Chinese maker Takom in 1:35 scale. According to its name it makes it possible to build both the early and the late version of the M114 light tracked vehicle and it holds an interior, that is the fittings of the fighting compartment, which are visible through open hatches. The kit is supplied unassembled and unpainted.

The real subject

The M114 was an American light tracked vehicle for reconnaissance and command, introduced in the 1960s. The hull was welded from aluminum alloy, which gave the vehicle a low weight, good mobility and the ability to cross water obstacles, but only limited toughness. The vehicle had a small silhouette and was to accompany reconnaissance units; experience in service, however, revealed the limits of the design and the type was later replaced. Early and late machines differed in the form of the commander's station and of the armament.

Building and painting tips

Before you close the hull up, decide which version you are building and check which parts apply to it; a mixed variant is spotted at first glance. Paint, age and dry-brush the interior before you cover it with the top plate, as once it is glued you will no longer reach it. Finish the running gear, including the aging, before the tracks go on. On the outside use a primer, then the base shade brightened on the horizontal faces. The aluminum hull got dirty quickly in the field, so it pays to work with a dust filter, staining around the hatches and mud in the running gear.

Who the model is for

  • Modelers of American postwar vehicles in 1:35 scale
  • Anyone interested in vehicles with an interior and open hatches
  • Builders of dioramas from the 1960s
  • Modelers with basic experience of building armored vehicles

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. According to its name the kit offers both the early and the late version, but only one of them can be built. Decide before you close the hull up.

The kit holds the fittings of the fighting compartment, which are visible through open hatches. The extent of the interior is not specified further here.

The interior and the running gear call for a well thought out order of work, but it is not an extremely demanding build. A modeler with basic experience of armored vehicles can manage it.

Last seen

TakomTKM21541:35

1:35 M114 early & late type w/ interior

A plastic kit of the M114 armored reconnaissance vehicle in 1:35 scale from Takom offers, according to its name, both the early and the late version and a well worked interior.
In stock
37.96 €
TakomTKM20871:35

1:35 US Medium Tank M3 Lee (Late)

Takom 2087 M3 Lee of late production is a 1:35 plastic kit of the American medium tank with a 75 mm gun in the hull and a 37 mm one in the turret.
In stock
39.96 €
QuickwheelQW-0641:35

1:35 Leopard 2 A5/A6 - Hobby Boss

The 1:35 Leopard 2 A5/A6 wheel masking set from the Quickwheel company separates the rubber of a road wheel from the disk during spraying. The cut-outs are cut for the wheels from the kit of the Hobby Boss company.
In stock
10.36 €
1:32 EF 2000A Typhoon exhaust nozzles - (early version)
-20 %
Favorite
AiresAIR21251:32

1:32 EF 2000A Typhoon exhaust nozzles - (early version)

Replacement engine exhaust nozzles for the Eurofighter Typhoon model in 1:32 scale, in the early form. The accessory sharpens the rear end of the aircraft, which kits usually handle in a simplified way.
In stock
32 €25.60 € You save 6.40 €
PolákPOL7851

Statdekor 2mm - Zelená modřínová 40x18cm

Statdekor 2mm Larch green 40x18 cm from Polak is a ready-made scenic carpet of static grass with a 2 mm fiber length for dioramas and layouts.
In stock
6.76 €
1:72 Chain with balls - Merkava
-20 %
Favorite
Firma4949T025/721:72

1:72 Chain with balls - Merkava

Chain with balls - Merkava 1:72 is a 3D-printed resin accessory: a chain with balls, the protective screen on the rear of the turret of the Merkava tank.
In stock
9.16 €7.33 € You save 1.83 €
1:72 SUU-7 Dispenser type 1 (4 pcs)-25 %Stock ClearanceFavorite
ReskitRS72-02961:72

1:72 SUU-7 Dispenser type 1 (4 pcs)

A resin set of four SUU-7 type 1 dispensers in 1:72 scale from the Reskit brand serves as external stores for aircraft models. It is a detail accessory, not a kit in its own right.
Last one!of 2
6.36 €4.76 € You save 1.60 €
LifecolorLIFLPW24

LPW24 - Frame Dirt Liquid Pigments Washes

The grime that holds on frames and lower areas is dealt with by Frame Dirt from Lifecolor. The liquid pigment from the Liquid Pigments Washes range is laid on from the top down, so that the traces match the way dirt runs.
In stock
3.96 €
1:48 Junkers Ju 87B/R Stuka propeller
-20 %
Favorite
Aires/QuickboostQB483871:48

1:48 Junkers Ju 87B/R Stuka propeller

A Quickboost propeller for the Junkers Ju 87B/R Stuka in 1:48 scale. A resin propeller with a faithful blade shape as a replacement for the plastic part.
In stock
7.96 €6.37 € You save 1.59 €
1:48 F-100 Super Sabre refueling probe
-20 %
Favorite
Aires/QuickboostQB485481:48

1:48 F-100 Super Sabre refueling probe

A refueling probe for the F-100 Super Sabre 1:48 (Quickboost) is a resin aircraft accessory in 1:48 scale from Quickboost. It is not an airplane model, but a detail part. It is supplied unassembled and unpainted.
In stock
6.36 €5.09 € You save 1.27 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.