1:35 Sd.Kfz. 251 & 11 Front Wheels (Fulda)

Replacement front wheels for the Sd.Kfz. 251 and Sd.Kfz. 11 half-track vehicles in 1:35, with a tread carried under the Fulda name.

Scale1:35
Manufacturer Quickwheel
Product EAN5591111248648

Responsibility details are not available.

13.56 €
11.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Sd.Kfz. 251 and Sd.Kfz. 11 are half-track vehicles built on a related chassis: the first as an armored personnel carrier, the second as a tractor. At the rear is the tracked running gear, at the front an unpowered axle with wheels by which the vehicle steers. Because the wheels do not transmit the drive, they wore differently from the tracks and their tires came from several suppliers. This set represents the tread carried under the Fulda name.

What the set offers

On a model of a half-track the wheel is a small but treacherous part: the round outline and the regular pattern give away every inaccuracy. Replacement wheels treat this part separately, with a chosen type of tread. For the builder that means two things at once. First, there is less cleaning up of the part in the place where the pattern is easily wiped away. Second, the tread that really was on a particular vehicle can be chosen from a period photograph, or two vehicles of the same type can be told apart by this detail.

Building and painting tips

Cut the excess material away with a sharp blade a little way from the part and sand the remainder down. Wash and degrease the wheel and only then paint it; choose the glue according to the material of the parts and the manufacturer's instructions. When seating them, take care over the vertical position and the same steering angle on both wheels. Paint the tire dark gray and the rim in the vehicle color, and keep the transition between them sharp. Apply the dusting from the bottom upward and let it fade, so that it looks like settled dust and not like a spray.

Terms of supply

What is supplied is an add-on set of front wheels. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For models of the Sd.Kfz. 251 and Sd.Kfz. 11 in 1:35. Before gluing, try dry how the wheel seats on the front axle pin.

They are fully on show and their round outline gives away every inaccuracy. A separate part also means less cleaning up in the place where the tread is easily wiped away.

Cut the excess material away a little from the part, sand the remainder down and wash and degrease the wheel. The glue follows the material of the parts and the manufacturer's instructions.

The tire dark gray, the rim in the vehicle color and the transition between them sharp. Apply the dust from the bottom upward, so that it fades and does not look like a spray.

Last seen

QuickwheelQWX-111:35

1:35 Sd.Kfz. 251 & 11 Front Wheels (Fulda)

Replacement front wheels for the Sd.Kfz. 251 and Sd.Kfz. 11 half-track vehicles in 1:35, with a tread carried under the Fulda name.
In stock
13.56 €
BrengunBRP720111:72

1:72 Blohm & Voss BV 40 German glider fighter

Blohm & Voss BV 40 in 1:72 scale is a plastic kit of the German unpowered glider fighter from Brengun.
In stock
13.56 €
Aires/QuickboostQB320961:32

1:32 MiG-23 Flogger control lever

Quickboost MiG-23 Flogger control stick 1:32 is a small resin detail set that will replace the control stick in the cockpit of a model of the MiG-23 fighter.
In stock
3.56 €
DK DecalsDK480541:48

1:48 Westland Whirlwind Mk.I

Westland Whirlwind Mk.I decals 1:48 from DK Decals offer markings for the British twin-engined fighter bomber in 1:48 scale for several RAF machines.
In stock
11.56 €
CMKCMK43961:48

1:48 Harrier GR.7 Engine for hasegawa

CMK Harrier GR.7 – engine 1:48 is a resin set showing part of the powerplant for a model of the British V/STOL aircraft Harrier GR.7 from Hasegawa in 1:48 scale.
In stock
19.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.