1:350 DKM Kriegsmarine 20mm Flakvierling C38 AA Guns (4 Sets)

1:350 DKM Kriegsmarine 20mm Flakvierling C38 AA Guns (4 Sets)

19.56 €
Add to Cart

1:350 DKM Kriegsmarine 20mm Flakvierling C38 AA Guns (4 Sets)

Very Fire 1:350 Flakvierling C38 quadruple 20 mm guns is a set of resin anti-aircraft weapons that replaces the coarsely cast guns from the kit on a model of a ship.

Scale1:350
Manufacturer Very Fire
Product EAN8591111000000

Responsibility details are not available.

19.56 €
16.17 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Resin Flakvierling C38 anti-aircraft guns of 20 mm caliber in 1:350 scale

The Very Fire set contains four sets of quadruple anti-aircraft guns of 20 mm caliber in the naval C38 form, as they were used on the surface ships of the Kriegsmarine. It is not a model of a ship but an exchange detail: in 1:350 scale the guns from the kit tend to be simplified into a compact lump of plastic, because an injection mold will not render a thin barrel or an openwork gun shield. Resin castings go two classes further in this.

What the set changes on the model

The anti-aircraft armament is visible from close up on a model of a ship and decides most about the impression of the finished work. Sharply cast barrels, a legible breech, fine mounts and protective shields break up the monotony of the deck and give the superstructures depth. Four sets in the package will as a rule suffice to occupy several gun positions on one model, so the exchange does not have to be done only in the most exposed place but consistently over the whole ship.

Building and painting tips

The castings are small and fragile, so work exclusively with tweezers and over a mat. Release them from the casting block with a sharp blade, and with a thin stem rather undercut it several times from different sides than break it. Washing in warm water with a detergent follows, so that the release agent from the mold disappears. It is glued with cyanoacrylate glue applied in a minimal quantity, best with the tip of a wire. Paint with an airbrush while they are still on the sprue or on tape, as a brush reaches areas this small only with difficulty. At the end a very thinned dark wash helps, letting the grooves of the mount stand out.

Who the set is for

  • builders of models of ships in 1:350 scale
  • modelers who swap the weapons from the kit for finer castings
  • experienced enthusiasts used to tweezers and cyanoacrylate glue
  • those who display a model close up or photograph it in detail

This is an accessory set, not a model of a ship. Glue, paints and the base kit are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are resin castings of anti-aircraft guns that replace the parts on a ship in 1:350 scale that is already built or on the bench.

The name states four sets. The exact division into individual parts and any extras are not specified here.

Strictly with tweezers, over a mat and with a sharp blade. Apply the cyanoacrylate glue in a tiny quantity, as a surplus floods exactly the detail the set is bought for.

The opposite order is better. Paint them while still on the holder or on tape and fit them to the model finished, otherwise a brush will not reach the lower surfaces.

Last seen

Very FireVFDKM071:350

1:350 DKM Kriegsmarine 20mm Flakvierling C38 AA Guns (4 Sets)

Very Fire 1:350 Flakvierling C38 quadruple 20 mm guns is a set of resin anti-aircraft weapons that replaces the coarsely cast guns from the kit on a model of a ship.
In stock
19.56 €
EduardFE15511:48

1:48 Supermarine Spitfire Tr.9 seatbelts STEEL

Spitfire Tr.9 seatbelts STEEL 1:48 are pre-printed photo-etched seat belts for the two-seat trainer version of the Spitfire.
In stock
8 €
Model MakerMM-D721541:72

1:72 MiG-21 in Polish service exclusive edition part V

The Model Maker MiG-21 in Polish service, exclusive edition, part V decal set in 1:72 scale offers Polish Air Force markings for a MiG-21 model.
In stock
10.76 €
HasegawaHA207881:24

1:24 YHP Nissan R91CP "1991 JSPC"

The YHP Nissan R91CP 1991 JSPC is an injection-molded plastic kit of the Japanese Group C racing prototype in 1:24 scale from the manufacturer Hasegawa.
In stock
41.96 €
1 Man Army35GEN4821:35

1:35 SOVIET Turret Nrs 6 - 9,5 mm Airbrush mask

An airbrush mask of Soviet turret numbers in 1:35 scale from 1 Man Army, in character heights of 6 to 9.5 mm.
In stock
19.16 €
Kits-WorldKW482101:48

1:48 Pre & Early WWII Serial and Cocarde Markings- 1938 – 1940.

Pre and Early WWII Serial and Cocarde Markings 1938 to 1940 is a sheet of modeling decals in 1:48 scale from Kits-World with serial numbers and roundels for aircraft of the turn of the 1930s and 1940s. It is not a kit but an accessory for building a model.
In stock
22.76 €
Firma4949H026/721:72

1:72 Japanese helmet M30-32 (detail)

The Japanese M30-32 helmet in 1:72 scale, the detail version is a small accessory for figures and dioramas, not a kit.
In stock
5.16 €
Dead DesignNM483141:48

1:48 F-86F Sabre Insignias Hasegawa

Stencils for spraying the national insignia and markings of the North American F-86F Sabre in 1:48 scale according to the mold given in the name.
In stock
8.36 €
Special MaskM480101:48

1:48 L-39ZA/ZA ART Albatros MASK

The Special Mask L-39ZA/ZA ART Albatros kabuki masks in 1:48 scale, for clean painting of the canopy and the wheels of the Special Hobby model.
In stock
7.56 €
Art ScaleASKM480421:48

1:48 T-33A double-sided painting mask for Great Wall Hobby

Art Scale 1:48 T-33A double-sided painting mask is a double-sided masking set for the cockpit glazing of the T-33A jet trainer in 1:48 scale. An accessory for a model, not a kit.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.