20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:350 USS Constellation CV-64 part 1 - lifeboats

1:350 USS Constellation CV-64 part 1 - lifeboats

17.24 €
Add to Cart

1:350 USS Constellation CV-64 part 1 - lifeboats

Eduard 1:350 USS Constellation CV-64, part 1 with the lifeboats is a photo-etched set for a kit of the aircraft carrier. It deals with one particular area of the model, namely the boats and the way they hang on the sides of the hull.

Scale1:350
Manufacturer Eduard
Product EAN8591511000077

Responsibility details are not available.

23 € 17.24 €
14.25 € without VAT
−25 % You save 5.76 €
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard photo-etched set 1:350 for the USS Constellation CV-64, part 1 with the lifeboats

A photo-etched detail set in 1:350 scale from the Czech manufacturer Eduard for a plastic kit of the aircraft carrier USS Constellation. It is not a kit but an accessory for a model that has to be obtained separately. The set for this ship is divided into several separately sold parts, and this one is designated as part one, devoted to the lifeboats. Anyone who wants to fit out the whole model combines several parts; anyone who only wants to refine a particular place buys precisely the one that deals with their area. Dividing by parts is the quickest way to tell what each little box serves on the model.

The real subject

The USS Constellation was an American aircraft carrier with an angled landing deck, four steam catapults and conventional, that is non-nuclear, propulsion. It served for decades and went through several modernizations, which changed the look of the superstructure, the radar equipment and the deck machinery. At a size of 1:350 the model comes out over half a meter long, so the small equipment on the sides of the hull, including the boats and their davits, is clearly visible on it.

Building and painting tips

Separate the tiny photo-etched parts with a scalpel on a hard surface and put them straight into a dish, so that they do not get lost. Make the bends in a bending tool, and with the small davits tweezers with flat jaws will help. They are glued with cyanoacrylate glue applied with a pin, as an excess of glue will make a shiny mark on the brass that is hard to remove. Degrease the brass and spray a primer on, otherwise the paint comes off during handling. Proceed by sections: finish and paint one area of the hull and only then move on to the next, otherwise you will break the finished parts with your hand during the rest of the work.

Who the set is for

  • Builders of ship models in 1:350 scale who want to replace the coarse plastic equipment on the decks and sides.
  • Modelers who fit a model out part by part and want to start with the lifeboats.
  • More experienced modelers used to tiny photo-etched parts and to working with tweezers.
  • Those who display a model in a case, where the fineness of thin metal parts stands out.

It is an accessory for a kit, not a model in its own right. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The lifeboats and the way they hang. The other areas of the ship are covered by further parts of the same range, which are sold separately.

You do not. Each part works on its own, and they are combined according to which area of the model you want to refine.

There is not. It is a photo-etched accessory for a plastic kit, which has to be bought separately.

Degrease them and spray a primer on. Paint does not hold on bare brass and rubs off during assembly.

Last seen

1:350 USS Constellation CV-64 part 1 - lifeboats-25 %Stock ClearanceFavorite
EduardED532811:350

1:350 USS Constellation CV-64 part 1 - lifeboats

Eduard 1:350 USS Constellation CV-64, part 1 with the lifeboats is a photo-etched set for a kit of the aircraft carrier. It deals with one particular area of the model, namely the boats and the way they hang on the sides of the hull.
3 leftof 4
23 €17.24 € You save 5.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.