Activation buttons for the fire suppression system and the electrical cut-off in 1:24 scale, version type 2. A small item that marks out a racing car on a model.
Responsibility details are not available.
A circuit or rally machine has to have two things reachable from outside: the trigger for the fire suppression system and the electrical cut-off. When the crew cannot get out after a crash, a marshal reaches for them. That is why they sit where they can be seen from the side of the car and are clearly marked, so nobody has to look for them.
Activation buttons for both circuits in 1:24 scale in the version marked as type 2, which differs from the other variants in the same range. On the model these are two items barely a millimeter across, which nonetheless tell a racing version from a road one at once. How many pieces the package holds is given in the manufacturer's instructions.
Work with tweezers over a tray, not over a carpet, because parts of this size are hard to find. Try the fit dry, and if the body needs a hole, drill it with a hand drill at a diameter smaller than you need and only then open it up. If the parts are not polystyrene, glue them with cyanoacrylate glue (super glue) applied with the tip of a toothpick. Wash the surface before painting and let it dry, and apply the paint in thin coats so the edges are not lost.
For builders of racing car models in 1:24 scale who take the outside details of a body all the way. Paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
