1:72 Fokker C.X mask for the canopy and the wheels (Kovozavody Prostejov) for a clean spray of the frames of the glazing and of the wheel hubs.
Responsibility details are not available.
A pre-cut self-adhesive masking set from the Czech manufacturer Kovozavody Prostejov for a model of the Fokker C.X in 1:72 scale. The set is intended for masking the frames of the glazing of the pilot's and observer's positions and at the same time the wheel hubs, so both can be painted with a sharp, even edge.
The Fokker C.X was a Dutch reconnaissance and light bomber biplane of the 1930s. Besides the Dutch Air Force it was operated in larger numbers by the Finnish Air Force, which used it in the Winter War and the Continuation War. It was a rugged aircraft with fixed landing gear and an open, later partly covered crew position.
First degrease the surfaces. Lift the mask with tweezers and press the edges down for a sharp edge. Apply the paint in thin coats so that it does not creep under the tape. The wheel hub masks make a clean transition between tire and hub easier.
This is a masking aid, not a paint and not a kit. Paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
