Eduard Brassin 1:48 A-4E/F - exhaust nozzle is a resin detail set of a replacement exhaust nozzle of the engine for models of the A-4 Skyhawk attack aircraft. It is not a model but an accessory.
Responsibility details are not available.
This resin detail set from the manufacturer Eduard holds a replacement exhaust nozzle of the engine for models of the A-4E and A-4F Skyhawk in 1:48 scale. It is not a kit of an airplane but an aftermarket accessory, with which you will replace the plastic nozzle of the base kit with a seamless resin part with a deeper drawing. A photo-etched part tends to be enclosed with the resin.
The Douglas A-4 Skyhawk was powered by a turbojet engine with the exhaust nozzle at the end of the rear fuselage. The nozzle is striking on a model and deepening it and removing the seams are among the rewarding improvements of the rear part of the aircraft.
Wash the parts clean of the mold release agent, separate them from the casting blocks and glue them with super glue (cyanoacrylate). The inside of the nozzle is usually sprayed in metallic shades and tuned with heat tints; wear respiratory protection while sanding. You will fasten the photo-etched part of the front wall with a drop of super glue.
This is an accessory, not a model in its own right. Glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
