1:48 B-26K Invader

1:48 B-26K Invader is a full photo-etched set for a model of this aircraft in 1:48 scale from the Czech maker Eduard. It is neither an airplane kit nor a masking set.

Scale1:48
Manufacturer Eduard
Product EAN7777777777777

Responsibility details are not available.

23.60 €
19.50 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched set for the B-26K Invader in 1:48 scale (Eduard)

A detail set of photo-etched parts for a model of the twin-engine B-26K Invader attack aircraft in 1:48 scale from the Czech maker Eduard. It is not an airplane kit but an accessory fitted to a model you already own. According to the code series it is a full photo-etched set, that is the more extensive version, not a smaller pre-painted Zoom set. Watch out for a mix-up: a masking set for the same aircraft at the same scale carries the same name, and that is a different product with different contents. The exact parts list is given in the instructions supplied with the set.

The real subject

The B-26K Invader was a rebuilt version of the older twin-engine Douglas A-26 Invader attack aircraft. The rebuild took in a strengthened structure, reworked wings and modernized equipment, so that the aircraft could handle demanding use in the 1960s, that is long after its original service had ended. On this type the cockpit, the instrument panel and the interior are among the areas where photo-etched parts show the most.

Usage tips

Go through the set with the instructions first and sort the parts by stage of the build; most of the photo-etch belongs in the interior and has to be fitted before the fuselage is closed up. Cut the parts off with a scalpel on a hard surface and make the bends over a metal ruler. They are glued with cyanoacrylate applied on the tip of a wire, while on larger areas two-part epoxy glue serves well, because it gives time to settle the part. Leave the painted parts as they are; degrease the bare photo-etched areas before spraying and use a primer for metal. Where the photo-etch replaces a plastic part, cut the original away and level the area.

Who the set is for

  • For modelers who want to lift the interior of an aircraft in 1:48 scale.
  • For more experienced builders with experience of photo-etched parts.
  • For anyone interested in American aircraft of the 1960s.
  • For those who already have the matching model of the same aircraft.

This is an accessory to a model, not a kit. The base model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of photo-etched parts, that is an accessory fitted to a model bought separately.

This product is a full photo-etched set. The product with the same name is a masking set for the same aircraft, that is self-adhesive masks for the glazing and the wheels, not photo-etched parts.

In full photo-etched sets some of the parts tend to be in color and some bare. The particular split is given in the instructions supplied with the set.

Metal does not hold with plastic cement. Cyanoacrylate glue applied in the smallest possible amount is used, and epoxy on large areas.

Last seen

EduardED4912621:48

1:48 B-26K Invader

1:48 B-26K Invader is a full photo-etched set for a model of this aircraft in 1:48 scale from the Czech maker Eduard. It is neither an airplane kit nor a masking set.
In stock
23.60 €
RT-DioramaRT356941:35

1:35 Control Housing

1:35 Control Housing is a diorama accessory from RT-Diorama in 1:35 scale - a control and distribution cabinet for the technical setting of a scene.
In stock
25.16 €
Bodi MiniaturesBODI350231:35

1:35 Soviet General

Bodi Miniatures 1:35 Soviet general is a resin figure of a senior Red Army officer of the Second World War for figure dioramas.
In stock
12.36 €
F.A.Q. 3-25 %Stock ClearanceFavorite
AK interactiveAK288

F.A.Q. 3

F.A.Q. 3 is an extensive AK Interactive handbook on the techniques of building, painting and weathering modern military vehicles. It is a book, not a kit.
6 leftof 7
71.96 €53.96 € You save 18 €
DK DecalsDK721611:72

1:72 Bristol Beaufighter Mk.IF / Mk.VIF - Czechoslovak Pilots in RAF Squadrons

A 1:72 decal sheet covering Bristol Beaufighter Mk.IF and Mk.VIF aircraft flown by Czechoslovak airmen in Royal Air Force squadrons.
In stock
11.16 €
AMMO of Mig JimenezA.MIG-F550

WARM SKIN TONE

AMMO of Mig Jimenez - Warm Skin Tone is an acrylic figure paint for warm skin shades, thinnable with water, in a 17 ml bottle.
In stock
3 €
Rob TaurusRBT480121:48

1:48 P-51 B

Rob Taurus 1:48 P-51B canopy is a vacuum-formed (vacuform) clear canopy for models of the North American P-51B Mustang fighter.
In stock
2.36 €
EduardED737511:72

1:72 Bf 109E-1

Eduard 1:72 Bf 109E-1 is a photo-etched set by Eduard for refining the detail of a model of the German Messerschmitt Bf 109E-1 fighter.
In stock
10.40 €
MontexMXK481361:48

1:48 WELLINGTON IC

Masks for the Vickers Wellington Mk IC night bomber in 1:48. They cover the glazing of the turrets and of the pilots' cockpit from outside and add three sheets for the roundels plus decals.
In stock
12.76 €
AZ modelAZP72061:72

1:72 Spitfire Tr.8

Supermarine Spitfire Tr.8 1:72 from AZ model: an injection-molded plastic kit of the two-seat trainer version of the famous British fighter, with a detailed cockpit and several decal options.
In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.