1:48 Bf 109F-4

Eduard 1:48 Bf 109F-4 masks

A set of self-adhesive pre-cut masks from Eduard in 1:48 scale, intended for precise spraying of the framing of the canopy glazing and other transparent areas of the German Bf 109F-4 fighter. It is not a kit and it is not a model of the aircraft, but an accessory for a kit you already own. The masks are applied to the clear parts and to the wheel rims, the areas are sprayed over with paint, and once they are removed the frames are left sharply defined, with no brushwork by hand.

The Messerschmitt Bf 109F, nicknamed Friedrich, was the aerodynamically cleanest stage in the development of the Bf 109. The F-4 version received the DB 601E engine and the centrally mounted 20 mm MG 151 cannon, which made it one of the most feared fighters of the early part of the war on both the Eastern Front and the Western Front.

Use

• The masks follow the shape of the glazing of one particular kit in 1:48 scale — check that the set matches your kit before you buy.
• Apply them to a thoroughly dry, smooth and degreased surface and press the mask down all the way around, so that paint cannot bleed underneath.
• Spray with an airbrush in thin coats, preferably in several passes — a heavy coat creates a step at the edge of the mask.
• Spray the cockpit interior color first and the final exterior shade afterwards; lift the mask off with tweezers in a slanting pull before the paint has fully hardened.
• Besides the glazing frames, sets usually also contain masks for the wheel rims and tires, for a clean separation of the colors.

Who it is for

For modelers who want their canopy frames sprayed sharp and straight, with no ragged edges and no overflow from a brush. It saves a great deal of time and frustration, above all on intricate glazing. Some basic experience with an airbrush is useful.

An accessory for masking while spraying, not a model. The kit, paints and glue are not included in the package, unless stated otherwise.