Bf 109G classic canopy TFace is a double-sided 1:48 masking set for spraying the canopy of Bf 109G models.
Responsibility details are not available.
This is a masking set, not an aircraft model. It contains precisely die-cut self-adhesive masks of yellow masking material for covering the framing of the classic-type canopy on models of the Bf 109G fighter in 1:48 scale.
The TFace designation means that the set contains masks for both sides of the clear part, the outside and the inside. That lets you paint the canopy frames from outside and from inside and achieve a faithful look with colored framing inside. The masks copy the shape of each pane exactly, so the slow job of cutting strips of masking tape falls away.
Degrease the clear part first and transfer the masks with clean tweezers. Press the edges down carefully so that no paint runs under them. Apply the paint in thin coats, ideally with an airbrush, and remove the masks while the paint is still fresh or just after it has dried. As a rule you spray the inside of the frames first and the outside afterwards.
These are masks on their own. The aircraft kit itself and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
