1:48 F-104 A/C - interior 3D decals for Kinetic kit

1:48 F-104 A/C - interior 3D decals for Kinetic kit

14.76 €
Add to Cart

1:48 F-104 A/C - interior 3D decals for Kinetic kit

1:48 F-104 A/C, interior 3D decals from the Kelik brand: colored, three-dimensional raised decals for a quick and convincing finish to the cockpit of the Starfighter in 1:48 scale. The set is prepared for the Kinetic kit.

Scale1:48
Manufacturer Kelik
Product EAN8591111901276

Responsibility details are not available.

14.76 €
12.20 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Interior 3D decals for the F-104 A/C in 1:48 scale (Kelik)

This set is neither a kit nor a resin casting. They are pre-colored 3D decals on decal paper which carry a three-dimensional relief, so the instrument panels, side panels and further elements of the cockpit get depth and color at one stroke. The set is cut for the interior of the F-104 fighter aircraft in the A and C versions in 1:48 scale and replaces the laborious hand coloring of small details. The dimensions of the elements correspond to the cockpit of the Kinetic kit.

The real subject

The Lockheed F-104 Starfighter was a single-engine supersonic fighter aircraft with a very slender fuselage and a short trapezoidal wing with a sharp leading edge. It was powered by a jet engine with an afterburner. The A version was the first production fighter variant for the US Air Force, while the C version represented the fighter and fighter-bomber form with the possibility of in-flight refueling. The cockpit of both versions is comparatively cramped, and with the canopy open a great deal is visible from it, so detailed equipment of the interior pays off on a model.

Application tips

Coat the base under the decal smooth, because on a matte and rough surface a decal silvers. First spray the parts of the cockpit with the base color of the interior, then apply gloss clear coat, let it dry thoroughly and only after that apply the decal. Use lukewarm water, settle the decal with a soft brush and draw the excess water off with the edge of a paper towel. Use softener carefully and weak, because with decals that have a three-dimensional relief it reacts differently than with ordinary thin decals, and too aggressive a product could beat the raised details down. At the end, unify the surface with matte clear coat.

Who the set is for

  • Modelers who want an equipped cockpit without painting tiny dials
  • Builders of the Starfighter in 1:48 scale with the canopy open
  • Those looking for an alternative to photo-etched and resin interior sets
  • Beginners as well as advanced modelers, because the application is simpler than gluing photo-etched parts

The package contains decals only. The model, paints and glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is a supplementary set of decals for the interior. The F-104 model itself in 1:48 scale has to be obtained separately.

It is pre-colored and has a three-dimensional relief, so once stuck on it acts like molded detail. It is applied in the same way as a wet decal, though, with water.

Caution is recommended. Relief decals react to softener differently than thin classic decals, and a strong product can damage the raised details. Start with a weak dose at the edges.

Yes, it is recommended. On a smooth gloss coat a decal does not silver and seats better. Once dry, coat the surface over with matte clear coat.

Last seen

KelikRSK48-01171:48

1:48 F-104 A/C - interior 3D decals for Kinetic kit

1:48 F-104 A/C, interior 3D decals from the Kelik brand: colored, three-dimensional raised decals for a quick and convincing finish to the cockpit of the Starfighter in 1:48 scale. The set is prepared for the Kinetic kit.
In stock
14.76 €
New WareNWAM08861:72

1:72 F-14B Bombcat, F-14D EXPERT BASIC kabuki masks

Masking templates cut from kabuki tape in 1:72 scale for models of the F-14B Bombcat and the F-14D, in the configuration designated EXPERT BASIC.
In stock
7.16 €
DK DecalsDK320241:32

1:32 P-40N in RAAF service

1:32 P-40N in RAAF service is a decal sheet from DK Decals intended for the large 1:32 scale. It offers the markings of Curtiss P-40N machines used by the Royal Australian Air Force.
In stock
13.56 €
LifecolorLIFUA209

UA209 - Signalbraun Matt RAL 8002

The signal brown Lifecolor Signalbraun Matt RAL 8002 is a warm matte shade for the youngest stage of corrosion: the first orange-brown cast on exposed metal and rust streaks running down sheet metal.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.