SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

1:48 Fairey Gannet AS.4

A set of photo-etched metal parts in 1:48 scale for a model of the Fairey Gannet AS.4 carrier-based anti-submarine aircraft. It adds the details that injection-molded plastic renders only in a simplified way.

Scale1:48
Manufacturer Eduard
Product EAN0091111871820

Responsibility details are not available.

16.40 € 12.32 €
10.18 € without VAT
−25 % You save 4.08 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Fairey Gannet was a British carrier-based aircraft intended for searching out and destroying submarines, operated from aircraft carriers in the 1950s and 1960s. The AS.4 version is a later step of this anti-submarine line. Typical of it is the bulky fuselage with a cockpit for a crew of three, folding wings on account of the hangars on ships, and a retractable radome under the fuselage.

What the set contains

This is a set of photo-etched parts in 1:48 scale. The elements are etched out of thin sheet metal, they are held on it only by small tabs, and they replace details that injection-molded plastic can render only in a simplified way. They are generally used to add to the areas where plastic is thicker than the real subject would call for. The exact extent and the list of parts is given in the manufacturer's instructions.

Building and painting tips

Photo-etched parts are glued with cyanoacrylate glue, because cement for polystyrene does not hold on metal. Cut the tabs through with a sharp blade on a hard surface and sand the mark they leave down. Run the bends over a straight metal edge or in a bender and press evenly along the whole length, so that the part does not ripple. Carry the small elements with tweezers and dose the glue with a pin, because a drop from the tube is too large for them. Wash, degrease and prime bare metal areas before painting, otherwise the finish is easily scuffed off.

Who it is for

The set suits modelers who want to push the level of detail on a kit in 1:48 scale beyond what injection-molded plastic allows and do not mind working with small metal parts. Which kit the elements are cut for is given in the manufacturer's instructions, so before building compare the scale and the version of the real subject, the Fairey Gannet AS.4. The plastic kit, the paints and the glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is an accessory set of photo-etched parts. The plastic kit, the paints and the glue are not part of the delivery, unless stated otherwise.

With cyanoacrylate glue, which is dosed with a pin or a wire. Cement for polystyrene will not join metal. On larger areas epoxy with a longer setting time helps as well.

A sharp blade and a hard surface for separating the parts from the tabs, tweezers for handling and a straight metal edge for the bends. A bender makes the work easier but is not necessary.

The elements are designed for 1:48 scale. The intended kit is given in the manufacturer's instructions, so compare it before buying with the model you are building.

Last seen

1:48 Fairey Gannet AS.4-25 %Stock ClearanceFavorite
EduardFE14251:48

1:48 Fairey Gannet AS.4

A set of photo-etched metal parts in 1:48 scale for a model of the Fairey Gannet AS.4 carrier-based anti-submarine aircraft. It adds the details that injection-molded plastic renders only in a simplified way.
Last one!of 3
16.40 €12.32 € You save 4.08 €
MontexMXK481411:48

1:48 P-39 Aircobra

Die-cut vinyl masks for the cockpit glazing of the Bell P-39 Airacobra in 1:48 scale. They cover the glass from outside and from inside, and one set of national insignia masks plus supplementary decals is enclosed.
In stock
9.96 €
Aires/QuickboostQB724041:72

1:72 Spitfire F Mk.22 exhaust

A resin exhaust for the Spitfire F Mk.22 1:72 from Aires/Quickboost. A detail replacement for the exhaust stacks with hollow outlets, for a more faithful engine area.
In stock
3.56 €
RT-DioramaRT358071:35

1:35 Printed Accessories: Wallpaper Nr.2

Wallpaper in 1:35 scale is a printed scenic accessory for a diorama. It gives the inner walls of a building the look of a lived-in space instead of an empty set piece.
In stock
3.96 €
MAiMMAIM353131:35

1:35 Zombie - Walker #4 (Male)

MAiM 1:35 resin figure of a zombie character (male, variant 4) for horror and post-apocalyptic dioramas. Supplied unassembled and unpainted.
In stock
14.76 €
LifecolorLIFXS13

XS13 - Italian Railways Set 1

The Lifecolor paint set Italian Railways Set 1 is a themed selection of modeling paints for one circle of subjects. The selection of shades is led by a subject, not by one particular vehicle.
In stock
19.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.