1:48 J7W1 Shinden one-sided express mask, self-adhesive and pre-cutted for Hasegawa

1:48 J7W1 Shinden one-sided express mask, self-adhesive and pre-cutted for Hasegawa

6.76 €
Add to Cart

1:48 J7W1 Shinden one-sided express mask, self-adhesive and pre-cutted for Hasegawa

1:48 J7W1 Shinden, the Art Scale single-sided masking set is a set of pre-cut self-adhesive masks for painting a plastic model of the Japanese fighter from the Hasegawa kit in 1:48 scale.

Scale1:48
Manufacturer Art Scale
Product EAN8891151000044

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Art Scale masking set for the J7W1 Shinden in 1:48 scale

This is a set of self-adhesive masks from the Art Scale brand for a plastic model of the Japanese Kyushu J7W1 Shinden fighter in 1:48 scale. The masks are supplied pre-cut to shape, so there is no laborious cutting out of masking tape with a knife, and they are stuck straight onto the clear part, that is onto the glazing of the model. This set is the single-sided form, that is the variant for masking from the outer face; the double-sided set of the same type is a separate item. The masks are cut for the Hasegawa kit; on a model from another maker they need not fit.

The real subject

The Kyushu J7W1 Shinden was a Japanese fighter with an unconventional canard layout: the main lifting surface at the rear, a small horizontal surface at the front and the propeller behind the cockpit, that is a pusher arrangement. The machine stayed at the prototype stage and flew only a few times in 1945. For a modeler it is attractive precisely for its shape, because it looks utterly unlike the other aircraft of the time. The cockpit sits far forward and its frames are markedly visible on a finished model.

Usage tips

Wash and degrease the glazing; fingerprints under a mask leave marks. Carry the mask over with tweezers or the tip of a scalpel, lay it down dry and press the edges with a toothpick so that no paint runs under them. Spray in thin coats at right angles to the surface; a heavy coat creates a little step at the edge. It pays to spray the shade of the frames first and only then the top color. Take the mask off at a shallow angle as soon as the paint is dry to the touch, not after several days.

Who the set is for

  • modelers building the J7W1 Shinden in 1:48 scale
  • those who do not care to cut masks out of tape by hand
  • those for whom masking from the outside is enough
  • collectors of unconventional designs and prototypes

This is an accessory for a model, not a kit. The model itself, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking set, that is an accessory for painting. The Shinden model itself you have to have or buy separately.

The single-sided form, according to the name, covers the glazing from the outer face; the double-sided one allows for masking from both sides. Each variant is a separate item.

No. They are supplied pre-cut to shape; you just lift them off the backing and stick them onto the clear part.

The set is cut for the particular Hasegawa kit. On a model from another maker it need not fit.

Last seen

Art ScaleASKM481251:48

1:48 J7W1 Shinden one-sided express mask, self-adhesive and pre-cutted for Hasegawa

1:48 J7W1 Shinden, the Art Scale single-sided masking set is a set of pre-cut self-adhesive masks for painting a plastic model of the Japanese fighter from the Hasegawa kit in 1:48 scale.
In stock
6.76 €
Artwox ModelBM10007A1:350

1:350 USS IOWA BB-61 Wooden Deck, Masking Sheet (For Very Fire VF350910)

Wooden veneer deck with a masking sheet from Artwox Model for a model of the battleship USS Iowa BB-61 in 1:350 scale. An accessory for a plastic kit.
In stock
37.16 €
Quinta StudioQDS+322801:72

1:72 Tornado Gr.1 3D-Printed & coloured Interior on decal paper (Italeri) (Small version)(with 3D-printed resin parts)

Quinta Studio 1:72 Tornado Gr.1 cockpit interior (3D decal, small version with resin parts) is a colored 3D-printed cockpit interior for the British Panavia Tornado Gr.1 combat aircraft in 1:72 scale, in the small version rounded out with 3D-printed resin parts. The target kit is Italeri.
In stock
48.36 €
Quinta StudioQD483901:48

1:48 Macchi C.202 Folgore Late 3D-Printed & coloured Interior on decal paper (Hasegawa/Eduard)

Quinta Studio 1:48 Macchi C.202 Folgore Late: a 3D-printed colored interior is an add-on set for bringing out the interior of a plastic model in 1:48 scale. It is not a kit of an aircraft. Target kits: Hasegawa and Eduard.
In stock
23.56 €
Mf zoneMFZ-TK241121:24

1:24 Speedline 18'' Michelin Tyres Toyota Corolla WRC (For Salvat/Hachette)

Resin Speedline wheels in a size of 18 inches with Michelin tires in 1:24 scale from Mf zone for models of the Toyota Corolla WRC.
In stock
27.96 €
AberABR35L0371:35

1:35 British 75mm Barrel with very late muzzle brake fot to Cromwell Mk IV

A turned metal 75 mm barrel with a very late muzzle brake (1:35) from Aber. A metal replacement barrel for models of the British Cromwell Mk IV cruiser tank.
In stock
13.56 €
TrumpeterTR072941:72

1:72 German Sd.Kfz 186 Jgdtiger (Porsche gear) w/Zimmerit

A plastic kit of the Jagdtiger Sd.Kfz.186 (Porsche running gear, with Zimmerit) in 1:72 scale from Trumpeter. The model is supplied unassembled and unpainted.
In stock
11.56 €
EduardFE15671:48

1:48 Bell P-400 Airacobra - Steel Seat Belts for Arma Hobby

Eduard 1:48 Bell P-400 Airacobra, steel seat belts are belts of etched steel printed in color for the seat in the P-400 fighter kit from Arma Hobby.
In stock
6 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.