29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 MiG-29K seatbelts STEEL

Eduard 1:48 MiG-29K seatbelts STEEL is a photo-etched set of pilot's seat belts for a MiG-29K model in 1:48 scale. This is not an aircraft kit but an accessory for the cockpit.

Scale1:48
Manufacturer Eduard
Product EAN7591991248649

Responsibility details are not available.

6 €
4.96 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 MiG-29K seatbelts STEEL — photo-etched seat belts

The set contains photo-etched pilot's seat belts for a MiG-29K model in 1:48 scale. It is an accessory, not an airplane kit — the model itself is obtained separately. At Eduard the STEEL designation marks a version made of steel: the material is springier and stronger than soft brass etch, so the belt holds the shape you bend it into and does not spring back. The parts come in a colored finish, so once they are glued in they need no further painting, which suits modelers who are only starting out with etched parts.

Why the belts of all things

With an open cockpit the seat belts are one of the first details anyone notices. On plastic parts they tend to be only suggested in relief, or they are missing altogether, and replacing them with etch raises the credibility of a cabin more than most other small improvements.

The real subject

The MiG-29K is the carrier-borne variant of the MiG-29 fighter, adapted for operation from an aircraft carrier. Against the land-based version it has strengthened landing gear for harder touchdowns, a tailhook, folding wings to save space in the hangar and changes to the structure against corrosion in a high-salinity environment.

Usage tips

Separate the parts from the fret with a sharp scalpel on a hard surface rather than with cutters — pulling deforms the etch. Make the bends over the edge of a bending tool or a razor blade. They are bonded with super glue applied with a pin in a really small amount; the gel version gives more time to settle a part into place. Let the belts fall freely over the edge of the seat and the tub, so that they do not look like a glued-on plank. Do not clear coat the colored surfaces across the board; apply a matte coat, if any, only in spots.

Who the set is for

  • Builders of the MiG-29K model in 1:48 scale with the canopy open
  • Modelers who want a quick improvement to a cockpit without a whole large etched set
  • Beginners with etched parts — the colored parts call for no further painting
  • Collectors of modern carrier-borne aircraft

This is an add-on set, not a model. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is an add-on photo-etched set of seat belts for a cockpit. The MiG-29K kit in 1:48 scale itself has to be obtained separately.

The belts are supplied in a colored finish, so they are normally glued in with no further painting. At most you can refine the shade of the fittings or dull them down in spots.

With super glue applied in a minimal amount, ideally with a pin or a piece of wire. Gel super glue gives more time to settle a part precisely.

Yes. Belts are among the simplest etched parts — they involve no complicated folding, and the colored finish takes away the most demanding part of the work.

Last seen

EduardFE14371:48

1:48 MiG-29K seatbelts STEEL

Eduard 1:48 MiG-29K seatbelts STEEL is a photo-etched set of pilot's seat belts for a MiG-29K model in 1:48 scale. This is not an aircraft kit but an accessory for the cockpit.
In stock
6 €
New WareNWAM09201:72

1:72 C-130J-30 Hercules ADVANCED kabuki masks

New Ware 1:72 C-130J-30 Hercules ADVANCED kabuki masks is a fuller set of pre-cut kabuki masks for the glazing, the wheels and camouflage details of the four-engine transport aircraft.
In stock
9.16 €
LZ modelsLZ354271:35

1:35 Shield for GM MkI Otter + M2 Browning machine gun

LZ Models 1:35 shield for the GM Mk.I Otter with an M2 Browning machine gun is a detail set (resin and photo-etched parts) for the Otter armored car. It is not a model but an accessory in 1:35 scale for experienced modelers.
In stock
7.96 €
TamiyaTA141111:12

1:12 Kawasaki ZZR 1400

1:12 Kawasaki ZZR 1400 is a kit of the Japanese sport touring motorcycle from Tamiya in the large 1:12 scale.
In stock
41 €
AML DecalsAMLC720111:72

1:72 Decals Bristol Beaufighter IF&VIF Part III.

Decals Bristol Beaufighter IF and VIF, Part III. 1:72 are a set of wet decals for models of the Bristol Beaufighter night fighter in 1:72 scale.
In stock
4.76 €
1:35 GSDF LAV 4x4 Sagged Wheel set (for Tamiya 1:35 )-25 %Stock ClearanceFavorite
DEF ModelDW350141:35

1:35 GSDF LAV 4x4 Sagged Wheel set (for Tamiya 1:35 )

A resin set of weighted wheels for the Japanese GSDF LAV 4x4 light armored vehicle from the Tamiya kit in 1:35 scale, with a realistic sag of the tires.
3 left
19.16 €14.36 € You save 4.80 €
Green Stuff WorldGSW4292

MDF Movement Trays 25mm x 10 - SLIM-FIT

MDF Movement Trays 25mm x 10 - SLIM-FIT is an MDF movement tray for moving a group of figures standing on circular bases 25 mm in diameter.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.