1:48 Sea Vixen

Dead Design 1:48 Sea Vixen is a masking set for the glazing of the two-seat carrier-borne fighter de Havilland Sea Vixen in 1:48 scale. The masks follow the shape of the frame, so the paint stays only where it is meant to be.

Scale1:48
Manufacturer Dead Design
Product EAN8591111732574

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Dead Design 1:48 Sea Vixen - glazing masks

A masking set of the Dead Design brand for the glazing of a model of the de Havilland Sea Vixen in 1:48 scale. It is not a kit nor an accessory that could be stuck onto a model permanently - it is a working aid. The masks are stuck onto the clear part, the model is sprayed and once the paint has dried the masks are taken off. A sharp frame of the cabin and clean glazing are left, that is, exactly what a frame painted by hand will never give.

The real subject

The Sea Vixen was a twin-boom carrier-borne fighter of the Fleet Air Arm with a crew of two. The pilot sat under a sliding canopy offset to the left of the centerline, while the second crew member worked on the right under a recessed hatch. It is precisely this asymmetry that makes the cabin of the Sea Vixen one of the most unpleasant parts in shape that can be masked with tape - the transitions of the frame are not mirror images of each other and the tape has to be cut differently on each side. A ready-made mask removes this problem.

How to work with the masks

First wash and degrease the clear part, otherwise the mask will not adhere over its whole area and the paint will run under. Lift the mask off the sheet with pointed tweezers and lay it on dry, without sliding it over the surface. After sticking each mask on, press it down with a toothpick or a wooden stick around the whole perimeter, above all in the corners. Spray in thin coats - a thick coat of paint creates an edge at the border of the mask that stays visible even after it is taken off. Remove the masks as soon as the paint is dry to the touch, not after several days; the longer they stay on the part, the more likely they are to tear the paint off with them.

Who the set is for

  • Modelers who want a sharp frame of the cabin without brushwork by hand
  • Builders of British carrier-borne equipment in 1:48 scale
  • Everyone who considers masking with tape the most tiresome part of a build
  • Those who reckon on spraying the cabin with an airbrush

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking set for spraying the glazing. You need to have a model of the Sea Vixen of your own.

As soon as the paint is dry to the touch. If you leave the masks on the part too long, there is a risk that they tear the paint off while being removed.

Yes, wash and degrease it. On a greasy surface a mask will not adhere around its whole perimeter and the paint will run under the edge.

The masks are cut to the shape of particular areas of the glazing, so the shape itself will tell you. Before sticking them on, try laying them in place dry.

Last seen

Dead DesignNM480881:48

1:48 Sea Vixen

Dead Design 1:48 Sea Vixen is a masking set for the glazing of the two-seat carrier-borne fighter de Havilland Sea Vixen in 1:48 scale. The masks follow the shape of the frame, so the paint stays only where it is meant to be.
In stock
7.56 €
EduardFE1031:48

1:48 F4U-1

A color photo-etched set from Eduard for the F4U-1 Corsair fighter in 1:48 scale. Pre-printed Zoom-line parts for a quick cockpit upgrade.
In stock
4.40 €
HaulerHLX481661:48

1:48 Crocodile M4 Sherman

A Hauler resin accessory set in 1:48 scale for converting an M4 Sherman model to the Crocodile flamethrower version. It is not a kit; the model is bought separately.
In stock
27.56 €
Kits-WorldKW721831:72

1:72 Boeing B-17F

A sheet of water-slide decals Kits-World 1:72 Boeing B-17F for supplementing the markings of a model of the Flying Fortress in 1:72 scale.
In stock
11.96 €
WoodlandWA1889

Horseback Riders - HO Scale

The set Horseback Riders from Woodland Scenics are finished, hand-painted figures of riders on horses in HO scale (1:87) for a ride out, a ranch and a path along the track.
In stock
18.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.