1:48 Seafire FR. 46/47 - Armament set

A resin armament set for the Seafire FR.46/47 in 1:48 scale replaces the plastic barrels and weapon covers with finer castings. An accessory for a kit, not a model of the aircraft.

Scale1:48
Manufacturer CMK
Product EAN8591111000000

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Seafire FR.46/47 - an armament set in 1:48 scale (CMK, resin)

The resin castings from the maker CMK complete the wing armament of the late carrier-based Seafire in the FR.46 and FR.47 versions in 1:48 scale. The set is fitted into a plastic kit, which you have to have separately; on its own it is not a model of the aircraft.

The real subject

The Seafire is the carrier-based derivative of the Spitfire, modified for operation from ships: a strengthened structure, an arrestor hook and, on the late versions, a folding wing. The FR.46 and FR.47 versions belong to the end of the development line, have a Rolls-Royce Griffon engine with a contra-rotating propeller and a markedly higher weight than the early Spitfires. The wing armament was formed by 20 mm cannons; their barrels protrude ahead of the leading edge and on a model they are thus one of the first details the eye notices. An injected barrel tends to be thick, with a rounded end and no bore.

Preparing the plastic before fitting

First cut the original plastic barrels off as close to the leading edge as possible, but with a small margin; with a fine saw rather than nippers, so that the surrounding surface is not dented. Sand the remainder down level with the edge and drill a hole in the mounting place to match the pin of the casting. The dry test then says what matters: whether the barrels protrude the same distance on both halves of the wing and whether they point parallel, which with cannons is noticed at once. Wash the castings free of the release agent beforehand and cut the casting blocks off with a saw; the thin barrels break easily, so take them off only just before gluing. They are glued with cyanoacrylate glue; sand resin wet or with a respirator.

Who the set is for

  • Builders of the late carrier-based versions of the Seafire
  • Modelers bothered by thick plastic barrels with no bore
  • More experienced builders used to working with fragile resin parts

The set is an accessory for a plastic kit. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For the late carrier-based Seafire in the FR.46 and FR.47 versions in 1:48 scale, as the name of the product states.

An injected barrel is thick in this scale, with no bore and with a rounded end. A resin casting has a sharper shape and will take the muzzle being drilled out.

Leave them on the casting block as long as possible, cut them off with a saw only before gluing, and do not pick the finished model up by the wing.

Usually yes: a hole matching the pin of the casting is drilled in the mounting place, so that the part sits firmly and in line.

Last seen

CMKCMK42991:48

1:48 Seafire FR. 46/47 - Armament set

A resin armament set for the Seafire FR.46/47 in 1:48 scale replaces the plastic barrels and weapon covers with finer castings. An accessory for a kit, not a model of the aircraft.
In stock
6.76 €
Caracal ModelsCAD721391:72

1:72 F-22 Raptor - Part 2

1:72 F-22 Raptor - Part 2 is a decal sheet from the Caracal Models brand with markings for the F-22 Raptor fighter in 1:72 scale.
In stock
19.96 €
Royal ModelRM7581:35

1:35 Soldier spray painting

In stock
15.96 €
ReskitRS48-01701:48

1:48 A-3 Skywarrior wheels set - Trumpeter -

A set of landing gear wheels for the A-3 Skywarrior (1:48) is a resin accessory for models of the carrier-based bomber Douglas A-3 Skywarrior from the maker Reskit. It is not a kit but replacement wheels for a more faithful landing gear.
In stock
14.76 €
GunzeH043

Hobby color - vínově červená

A dark wine red from the acrylic Gunze Hobby Color range, 10 ml.
In stock
3 €
RevellRE037871:32

1:32 Arado Ar-196 A-3 Seaplane

An injection-molded plastic kit of the Arado Ar 196 A-3 in 1:32 scale from Revell, the German shipboard floatplane reconnaissance aircraft.
In stock
35.96 €
1:32 FAB-250 М-54 bombs (4 pcs)-25 %Stock ClearanceFavorite
ReskitRS32-05651:32

1:32 FAB-250 М-54 bombs (4 pcs)

Four FAB-250 M-54 bombs of the 250 kg weight class as an ordnance accessory for aircraft models in 1:32 scale.
Last one!of 4
15.16 €11.36 € You save 3.80 €
ReskitRSU48-04991:48

1:48 A-10A/C Thunderbolt II ACES II ejection seat

Reskit 1:48 A-10A/C Thunderbolt II — ACES II ejection seat is a fine 3D-printed resin accessory that replaces the simplified seat from the kit with a faithful replica.
In stock
10.36 €
BrengunBRP720301:72

1:72 ZLIN Z-50 WORLDWIDE USERS

Zlin Z-50 Worldwide Users in 1:72 scale from the Czech brand Brengun: an injection-molded plastic kit of the aerobatic aircraft with decals for operators from around the world.
In stock
14.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.