1:48 Su-34. Jet nozzles

Engine nozzles 1:48 Su-34 are a detail accessory for a kit — a finer replacement for the plastic ends of both engines of a model of the Su-34 in 1:48 scale.

Scale1:48
Manufacturer Mettalic Details
Product EAN8591111000000

Responsibility details are not available.

22.36 €
18.48 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Exhaust nozzles of the Su-34 in 1:48 scale

An accessory of the Metallic Details brand intended to replace the plastic exhaust nozzles of a model of the Su-34 in 1:48 scale. This is not a kit of the aircraft but an accuracy set which the modeler fits to a model bought separately. The benefit is a thinner wall at the edge of the nozzle and a finer division of the petals, that is detail that an injection mold for plastic cannot hold.

The real subject

The Su-34 is a two-seat attack and bomber aircraft derived from the Su-27 design family. It differs from the fighter versions above all in its forward fuselage, with the crew seated side by side and with an armored cockpit; propulsion is provided by two jet units housed in separate nacelles. The rear of the airframe with its pair of nozzles and the extended fairing between them is among the most conspicuous areas of the whole machine, so everyone looking at the model looks at it.

Fitting and painting tips

Wash the cast parts in lukewarm water with dish soap before painting and let them dry on a paper towel. Before you start gluing, try the depth of seating dry: the nozzles are meant to look as if they grew out of the nacelle, not like a fitted mouthpiece. If the diameter is a hair different, take material off the plastic of the kit. Painting is best managed separately, with the part mounted on a stick. Apply metal shades in thin coats, best with an airbrush, and do not forget to stir them thoroughly before spraying — the pigment always sinks to the bottom. A different coloring inside and outside the nozzle, and light casts of brown, copper and blue-violet at the point of the greatest thermal load, give the surface depth. Finally we recommend a light application of dark pigment rubbed into the grooves; use matte clear at the end only very carefully, as it can easily kill the metal effect.

Who the set is for

  • builders of modern combat aircraft in 1:48 scale
  • modelers who are bothered by thick plastic edges on the nozzles
  • anyone interested in working with metallic paints and thermal effects
  • more advanced modelers with experience of cast parts

The set is an accessory to a plastic kit, which it does not hold. Paints, glue and other accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is a detail accessory, that is replacement exhaust nozzles for a kit in 1:48 scale, which has to be bought separately.

Painting the part separately, mounted on a stick, proves itself. Stir the metallic paint thoroughly and apply it in thin coats; depth comes from a different shade inside and outside and from fine casts of brown and blue-violet at the point of the greatest thermal load.

As a rule it is enough to clean the opening in the nacelle out and try the seating dry. Take any difference in diameter off the plastic of the kit, not off the casting.

Superglue. Ordinary cement for polystyrene will not join cast parts.

Last seen

Mettalic DetailsMDR48441:48

1:48 Su-34. Jet nozzles

Engine nozzles 1:48 Su-34 are a detail accessory for a kit — a finer replacement for the plastic ends of both engines of a model of the Su-34 in 1:48 scale.
In stock
22.36 €
GunzeS080

S080 Cobalt Blue - (Semi Gloss) Spray

Gunze Mr.Color Spray S080 Cobalt Blue (Semi Gloss) is a lacquer modeling spray in a saturated cobalt blue with a faint cast toward purple and a semi-gloss finish. The aerosol sprays straight from the can, without an airbrush.
In stock
9.16 €
AK interactiveAK4230

MERDC CAMOUFLAGE COLORS SET

AK Interactive MERDC Camouflage Colors Set is a set of water-based modeling acrylic paints for the four-color MERDC camouflage schemes used on US Army hardware.
In stock
19.96 €
EduardED6482471:48

1:48 Bf 109G exhaust stacks

1:48 Bf 109G exhaust stacks is an Eduard resin detail set with exhausts for a model of the Messerschmitt Bf 109G in 1:48 scale. It is an accessory, not a kit.
In stock
6 €
EduardED4910941:48

1:48 Messerschmitt Me-262A

Photo-etched metal parts in 1:48 scale for a model of the Messerschmitt Me 262A jet fighter. An accessory for a finished kit.
In stock
19.80 €
AberABR350601:35

1:35 Cromwell Mk.IV

A photo-etched set for the Cromwell Mk.IV in 1:35 scale from Aber: metal parts for detailing the British cruiser tank. It is not a kit.
In stock
14.36 €
Aires/QuickboostQB481881:48

1:48 J-35 Draken air scoops

Resin air scoops for the Saab J-35 Draken in 1:48 scale from Aires (the Quickboost range). Fine castings replace the plastic parts; this is not an airplane model.
In stock
4.76 €
Freedom Model KitsFMK1480021:48

1:48 ROCAF Ground crew Vol-2

Freedom Model Kits 1:48 ROCAF Ground crew Vol-2 is a set of figures of ground personnel of the Republic of China Air Force in 1:48 scale, intended to bring flight line vignettes and display cases to life.
In stock
24.76 €
AoshimaAO054371:24

1:24 SHADOW5 (5H) 14inch

A set of alloy wheels and tires SHADOW5 (5H) 14 inch in 1:24 scale for car model kits and conversions. It is not a car model but an add-on set of rims, tires and decals.
In stock
11.16 €
Print ScalePRSC482221:48

1:48 Bf-110 Zerstorer Part 1

Bf 110 Zerstorer decals, part 1, in 1:48 scale are a printed sheet of markings for models of the twin-engined Messerschmitt. They go on a finished, painted model, not on bare plastic.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.