1:48 YaK-9 (Modelsvit)

The photo-etched detailing set Metallic Details 1:48 Yak-9 for refining the cockpit and the external details of a model of the Soviet fighter aircraft. It is an accessory for a kit, not a model of the aircraft. Target kit: Modelsvit.

Scale1:48
Manufacturer Mettalic Details
Product EAN8591111714174

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Metallic Details 1:48 Yak-9 — photo-etched detailing set

A set of fine photo-etched parts from metal sheet intended for the additional refinement of a plastic model of the Yakovlev Yak-9 in 1:48 scale. It is not a kit of the aircraft, but an aftermarket accessory. It addresses above all the elements where injection-molded plastic runs into its physical limits: the instrument panel and the side panels of the cockpit, the seat belts, small levers, covers, meshes and sheet-metal parts that are supposed to be only a few millimeters thick on the real aircraft. The manufacturer is the Ukrainian company Metallic Details. The photo-etched fret is cut for the Modelsvit kit.

The real subject

The Yak-9 was a Soviet single-engine fighter aircraft of mixed construction, one of the most widespread types of Soviet fighter aviation in the second half of the war. It was produced in a number of versions differing in armament, fuel system and range. The low-set glazed cockpit with a good view means that the interior is largely visible on the finished model, so refining the cockpit pays off.

Usage tips

Separate the parts with a sharp scalpel on a hard surface, not with nippers. Make the bends slowly on a photo-etch bending tool or between two blades, as the sheet takes only a limited number of repeated bends. They are glued with cyanoacrylate glue (super glue) in a minimal amount, applied with a pin. Paint and fit the interior parts before closing the fuselage. Before painting, degrease the sheet and use a base color, as otherwise the paint does not hold on smooth metal. Try everything dry.

Who the set is for

  • builders of Soviet fighter aircraft of the 1940s in 1:48 scale
  • modelers who want a credibly executed cockpit
  • more experienced modelers with experience of photo-etched parts and cyanoacrylate glue
  • competition builds, where the fineness of the detail decides

The accessory is supplied unassembled and unpainted. It is not a complete model — the base kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a photo-etched accessory that is used when building a plastic model of the Yak-9 in 1:48 scale. The kit has to be bought separately.

Fit and paint the interior parts before closing the fuselage, and the external elements only at the end, after sanding the seams.

Cyanoacrylate glue (super glue) applied in a minimal amount. Cement for plastic does not hold on metal.

A sharp scalpel, fine tweezers and a hard surface are enough. A photo-etch bending tool makes the work much easier, but it is not a condition.

It is intended for the Modelsvit kit.

Last seen

Mettalic DetailsMD48071:48

1:48 YaK-9 (Modelsvit)

The photo-etched detailing set Metallic Details 1:48 Yak-9 for refining the cockpit and the external details of a model of the Soviet fighter aircraft. It is an accessory for a kit, not a model of the aircraft. Target kit: Modelsvit.
In stock
7.96 €
SpalahSP107721:72

1:72 Windows (2 pcs.)

In stock
6.36 €
ETA dioramaETA7201:35

1:35 POLAND - Flags

In stock
5.96 €
AMMO of Mig JimenezA.MIG-8538

Clip Organizer Base

Clip Organizer Base from AMMO of Mig Jimenez is a base with holders (clips) for gripping and holding small parts during building and painting. It is not a kit but an aid for the workbench.
In stock
9.96 €
Green Stuff WorldGSW0713

Token Holders 35mm

Game token holders of 35 mm, a small tool for board games and wargaming.
In stock
3.96 €
1:72 SBD Dauntless-25 %Stock ClearanceFavorite
EduardSS6971:72

1:72 SBD Dauntless

A photo-etched set of parts for a model of the SBD Dauntless carrier-borne dive bomber in 1:72 scale. An accessory to a finished kit.
Last one!of 4
10.40 €7.80 € You save 2.60 €
VallejoVAL76035

Dead Flesh

A pale flesh shade from the Vallejo Game Air airbrush range. It aims at undead and sickly looking figures, where the skin should have no healthy cast.
In stock
3 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.