1:72 MiG-21 BIS / MF / MFN - Advanced Kabukli Masks (for Eduard Kits)

The real subject

The MiG-21 in the MF and bis versions represents the later, markedly reworked form of this fighter. They are known by the wide dorsal spine running from the cockpit back to the tail surfaces, by the radar in the cone of the nose intake and by the cannon built in under the fuselage. The bis version was the last large production form. The MFN designation belongs to upgraded MF aircraft of the kind flown by the Army of the Czech Republic.

What the set covers and what it fits

The masks are cut from kabuki paper, that is a thin self-adhesive paper that follows slightly curved surfaces well and leaves no sticky film on clear parts once removed. The set is cut for MiG-21 kits from Eduard in 1:72 scale. Three levels are offered for the same aircraft, Basic, Advanced and Expert; this item is the Advanced level. What exactly each level contains is given by the manufacturer in the overview of the set.

How to apply and remove the masks

• Wash and degrease the glazing before applying, as a mask will not settle on a greasy surface.
• Apply the masks before spraying, not after; lift them with tweezers and press them down with a stick along the edge of the frame.
• Spray the edges with the interior shade first and only then with the outer coat; the transition will be cleaner.
• Take the mask off as soon as the paint becomes tacky, as the edge tears in a fully cured coat.
• Keep the offcuts, as they come in handy for small areas the set does not cover.

Who it is for

For builders of MiG-21s in 1:72 scale who do not want to cover the glazing with strips of tape. The kit, paints and glue are not included in the package, unless stated otherwise.