The set 1:48 Osprey MV-22 Canopy, Windows And Wheels Paint Masks For HobbyBoss 81769 - Interior And Exterior masks the glazing from both sides and the tires at the same time.
Responsibility details are not available.
A practical set for the most tedious part of the build. It covers the frames of the cockpit, the side windows and the discs of the tires, and that in two layers for the inner and the outer side of the glass. It is cut from a thin masking tape, which follows a slight curvature and after spraying comes away without residue.
The V-22 Osprey joins two philosophies: tilting nacelles with huge rotors let it take off from a deck or a clearing, but once tipped into the horizontal position it flies with the speed and range of a turboprop aircraft. Development took more than two decades and was accompanied by stormy debate, but with the United States Marine Corps the MV-22 version replaced aging helicopters and since its deployment in the field it has won a place as the transport backbone of the assault force.
First wipe the glass and let it dry completely; only then lay the inner parts of the mask on. Spray the frames in order from the interior color to the exterior shade. With the wheels mask the disc and spray the dark tread; the reverse procedure leads to the rim being flooded. Around the frames it pays to lay a thin sealing pass of the base shade, which makes good any running under. After taking the tape off, go over the edges with a magnifying glass; a small overrun can be evened out with a thin brush before varnishing.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
