An imitation of a bolt with a nut and a large washer 1.1 mm in size. The wide ring under the head turns the joint into a bold detail.
Responsibility details are not available.
A bolt with a nut and a large washer 1.1 mm in size to be glued onto a model. Compared with an ordinary joint this part also has a wide ring under the head which in scale reads as a face and thereby markedly enlarges the joint. That is precisely its advantage: even on a small surface it is clear that something is held there, and the surface of the model gains a rhythm.
In reality a wide washer is used where the head of a bolt would otherwise push through a thin material or a soft pad: on sheet-metal covers, on the mounting of tanks and fenders, on frame joints, at exhaust brackets or on composite parts. On a model it therefore suits places where there is a thin wall under the joint, and anywhere the joint is to be visible at first glance.
Level and degrease the base so that the part seats over its whole underside; a large washer is sensitive to unevenness and readily tilts. Apply the glue in a small amount to the model, not to the part. When painting it helps to leave the ring of the washer a shade lighter than the head, or to let a dark wash into the transition which separates the two parts.
For modelers of motorcycles, cars and machinery who want the joints on a model graded rather than all the same. Paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
