Artwox Model 1:700 a wooden deck with a mask and photo-etched parts for the battleship Mutsu is a combined package of accessories to a plastic kit. Intended for the Aoshima 045091 kit.
Responsibility details are not available.
A package of accessories, not a ship model. According to the name it contains a self-adhesive veneer deck with the laying of the planks printed on it, a masking template for spraying and a set of photo-etched parts. Everything is adapted to one particular plastic kit.
The photo-etched parts are the most demanding part of the whole set. Cut the parts off the fret on a hard surface with a sharp scalpel or photo-etch scissors, and never snap them off: brass deforms at a fold and is then hard to straighten. Make the folds on the edge of a steel rule or in a bending tool, always in one decisive movement. They are glued with super glue applied in a really small amount; it works well to squeeze a drop onto a piece of film and pick it up with the tip of a toothpick. Before painting, degrease the brass and go over it with a primer, otherwise the paint will not hold on the smooth surface and will rub off during handling.
Glue the veneer onto a finished, degreased plastic deck and before the photo-etched details go on, as they would get in the way when a cloth is drawn over it. Peel the protective film off in sections, lay it from the center toward the edges and trim the overhangs with a new blade.
The accessory is cut for the Aoshima 045091 kit, so check the match with your version. The kit, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
