Reskit AIM-7F Low Vis Sparrow III, 4 pcs, 1:72 is an aftermarket 3D-printed resin set of four air-to-air missiles in the low-visibility form for models of the F-4, F-5, F-14, F-15, F-16 and F/A-18 fighters.
Responsibility details are not available.
The set contains four 3D-printed replicas of the medium-range AIM-7F Sparrow III missile in 1:72 scale, in the version suitable for low-visibility (low-vis) gray coloring. It is not a model of an aircraft but an armament accessory for hanging under models of the F-4 Phantom II, F-5, F-14 Tomcat, F-15 Eagle, F-16 and F/A-18 fighters. The parts have finely reproduced control surfaces and surface detail.
The AIM-7F was a modernized version of the Sparrow with improved electronics and a longer reach; it served as the main radar missile of American fighters from the 1970s on. The resin copies replace the simpler plastic missiles from the box.
First wash the parts to remove any mold release residue, separate them carefully from the casting blocks or print supports and clean them up. Glue them with cyanoacrylate glue. Protect your airways when sanding resin and apply a primer before painting.
The accessory is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
