7.96 €

1:72 Mask V. Wellington Mk.IA/C BASIC (AIRFIX)

1:72 Vickers Wellington Mk.IA/IC BASIC masks is a set of pre-cut self-adhesive masking templates from New Ware for a model of the British twin-engine bomber in 1:72 scale. It is an accessory for the model that dramatically speeds up masking the extensive glazing. The templates are cut for the Airfix kit.

Scale1:72
Manufacturer New Ware
Product EAN8591111736091

Responsibility details are not available.

7.96 €
6.58 € without VAT
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:72 Vickers Wellington Mk.IA/IC BASIC masks (New Ware)

A masking set for a model of the Vickers Wellington bomber in the Mk.IA and Mk.IC versions in 1:72 scale. It contains a sheet of self-adhesive templates cut to the shape of one particular kit, in this case the Airfix one. The BASIC grade is the most restrained variant of the New Ware range and aims at the main glazing; the ADVANCED and EXPERT grades mask a wider extent. The set is not a kit; it is an accessory for the painting stage.

The real subject

The Wellington was a British twin-engine bomber with a distinctive geodetic fuselage structure designed by Barnes Wallis. A skeleton of light sections woven into a lattice gave the airframe high resistance to damage, and the whole was covered with fabric. The Mk.IA and Mk.IC versions belonged to the early production standards and carried most of the weight of the night raids in the first years of the Second World War, until four-engine types replaced them. The Wellington nevertheless went on serving in coastal and training roles.

Why masking pays off on this model

The bomber has a glazed nose, a cockpit and both gun turrets, and that means a lot of knife work directly over the clear parts when masking by hand. A pre-cut set shortens this part of the build from hours to minutes and, above all, makes the width of the framing uniform, which shows at once on a large glazed area. Place the mask with tweezers, press it down all around with a soft wooden stick and spray in thin coats at right angles to the edge so that paint does not run under it. A proven procedure is to spray the glazing with the interior color first and then with the upper camouflage. Mask and spray the turrets and the nose together with the fuselage so that the shade matches. Do not throw the leftover sheet away; the offcuts come in handy for masking small things on other models.

Who the set is for

  • Builders of British Second World War bombers in 1:72 scale
  • Modelers who do not want to trim tape by hand on a large glazed area
  • Those who want equally wide and symmetrical framing all over the model
  • Anyone who considers masking the most tedious part of a build

The package contains masking templates only. The kit, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. This is a masking set, that is an accessory for painting. The kit, paints and glue are not included.

On the glazing. The subject has a glazed nose, a cockpit and gun turrets, so there would be a great deal of hand trimming, and the width of the framing would differ in every section.

No. They are cut precisely to one kit and usually do not fit another model of the same aircraft. In this case it is the Airfix kit.

Shortly after the paint has dried, and slowly, at an angle over the edge. The longer a mask stays on the model, the harder the adhesive becomes.

Last seen

Hobby BossHB803571:48

1:48 F8F-1B Bearcat

An injection-molded plastic kit of the Grumman F8F-1B Bearcat in 1:48 scale from Hobby Boss - the American carrier fighter, the version armed with four 20 mm cannons.
In stock
20.36 €
Rob TaurusRBT720451:72

1:72 F4U-1 D

Vacuum-formed clear canopy for an F4U-1D Corsair model in 1:72 scale — a clear replacement for the cockpit canopy.
In stock
2.36 €
Mark IDMF144021:144

1:144 Hurricane roundels Part1

Hurricane roundels, part 1 (1:144) is a decal sheet with British national roundels and fin flashes for Hurricane models in 1:144 scale.
In stock
2.76 €
AoshimaAO054271:24

1:24 Garson D.A.D Zuenglein 20 Inch

Aoshima 1:24 Garson D.A.D Zuenglein 20 inch is an accessory set of model wheel rims and tires in the style of the luxury brand Garson D.A.D for modifying passenger cars in 1:24 scale.
In stock
11.16 €
New WareNWAM13671:48

1:48 MiG-21 R - ADVANCED Kabuki Masks (for Eduard Kits)

The MiG-21R ADVANCED painting masks in 1:48 scale from New Ware will help you paint the cockpit, the wheels and the small details of a model accurately.
In stock
7.96 €
HaulerHLH720491:72

1:72 Kubelwagen (S-model)

The Kübelwagen 1:72 photo-etched set (Hauler) is a photo-etched accessory for models of the German light cross-country car. It is not a kit but a detail set.
In stock
11.16 €
Kovozávody ProstějovKPM03991:72

1:72 S.A. Bulldog T.1

S.A. Bulldog T.1 1:72 is an injection-molded plastic kit of the British two-seat trainer from the Czech maker Kovozavody Prostejov.
In stock
11.96 €
Alclad LacquersALCHW006

Night Blue for Dark Gray

Night Blue for Dark Gray is a liquid weathering shade (a wash and a filter) from the Alclad brand, tuned for darkening and deepening dark gray surfaces.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.