1:72 MiG-29 Fulcrum exhaust nozzles

Replacement exhaust nozzles for a model of the MiG-29 fighter in 1:72 scale. They replace the coarse nozzles from the kit with a thin-walled rendering.

Scale1:72
Manufacturer Aires
Product EAN8591111214339

Responsibility details are not available.

16.80 €
13.88 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The MiG-29 is a Soviet twin-engine fighter, known in the West under the reporting name Fulcrum. It is one of the most widespread machines of its generation and still serves in many countries today. It is the pair of nozzles at the tail that is among its most recognizable features, because they sit far apart with free space left between them.

What the set solves

The nozzles show on a model of the aircraft both from below and from behind, and the viewer looks straight into them. An injection-molded kit tends to be helpless here: the wall comes out thick, the interior shallow, and the seam from gluing the halves runs right across the rim. The replacement parts offer a thin rim, a deeper interior and segment definition on the shell, so the tail of the model stops looking solid and blunt. The scope of the particular set is given in the manufacturer's instructions.

Building and painting tips

The parts are not polystyrene, so cement for plastic does not hold on them; use super glue. Cut the excess material away with a sharp blade a little short of the part and sand off the rest flat, so that the part sits square in the opening at the tail. Wash in lukewarm water with detergent and degrease before painting. The nozzles are painted as metal under heat stress, that is in shades of scaled metal with temper colors toward the end; the interior tends to be lighter than the shell. Dry-fit them before you paint the fuselage and take away as much of the plastic they replace as needed.

Who it is for

For modelers building the MiG-29 in 1:72 scale who want the tail of the model finished well enough to stand up to a close look. The kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Replacement exhaust nozzles for a MiG-29 model in 1:72 scale. The exact scope of the set is given in the manufacturer's instructions. The kit, paints and glue are not included.

Super glue. The parts are not polystyrene, so cement for plastic has nothing to soften.

Replacement nozzles are cut for a particular kit. The manufacturer's instructions say which one, so dry-fit the parts and rework the opening at the tail as needed.

As metal under heat stress, that is in shades of scaled metal with temper colors toward the end of the nozzle. The surface has to be degreased beforehand.

Last seen

AiresAIR71241:72

1:72 MiG-29 Fulcrum exhaust nozzles

Replacement exhaust nozzles for a model of the MiG-29 fighter in 1:72 scale. They replace the coarse nozzles from the kit with a thin-walled rendering.
In stock
16.80 €
OmaskOMK340451:48

1:48 Hawker Hurricane Mk IIc mask for insignias

Omask Hawker Hurricane Mk IIc masks for insignia 1:48 are painting masks for spraying the national insignia on models of the Hurricane Mk IIc in 1:48 scale.
In stock
5.96 €
PlusmodelPMO0571:35

1:35 Road signs: allied western front WW II

Direction and traffic signs of the kind Allied units put up behind their advance across western Europe. The sheet of stiff paper measures 19 x 13 cm; the individual signs are cut out of it and mounted on posts of your own making. For 1:35 scale.
In stock
6.36 €
Aires/QuickboostQB486471:48

1:48 I-16 gun barrels and pitot tube

Quickboost 1:48 I-16 gun barrels and pitot tube is a resin set that replaces the plastic barrels and the airspeed sensor on a model of this Soviet fighter monoplane.
In stock
3.56 €
Mr.PaintMRP189

Traffic Grey (for MiG-25 and MiG-31 overall coat)

Mr.Paint Traffic Grey is a gray lacquer modeling shade for the overall coat of the Soviet and Russian MiG-25 and MiG-31 interceptors, ready for the airbrush.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.