1:72 Pilatus PC-12 M Eagle is an injection-molded plastic kit of the single-engine turboprop aircraft in the multipurpose form from the Sova Model brand.
Responsibility details are not available.
The kit in 1:72 scale captures the single-engine turboprop Pilatus PC-12 in the form for special duties. Besides the injection-molded plastic sprues you will find photo-etched sheet and masking film for the glazing in the box.
The PC-12 is a Swiss machine with a pressurized cabin, a large cargo door on the left side and the ability to work even from short and unprepared surfaces. The form designated PC-12 M is modified for patrol and observation flights: it carries equipment under the fuselage, additional aerials and further elements that the transport version does not have. Low operating costs and long endurance made it a sought-after platform where a jet aircraft would be needlessly expensive.
The slender fuselage with its extensive glazing calls for careful filling and sanding of the seams before the cabin is seated for good. Lay the painting out from the bottom up and spray the light shades over a quality base, so that the plastic does not show through. Fit the thin aerials and the covers under the fuselage only onto finished paint; until then the model is far easier to handle.
The model is supplied unassembled and unpainted. The package does not contain paints or glue, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
