1:72 Pilots with JHMSC helmet MBU-14 mask

Figures of pilots in 1:72 scale in modern flying gear: the JHMCS helmet and the oxygen mask designated MBU-14. An accessory for an aircraft model and for a diorama alike.

Scale1:72
Manufacturer Rise144models
Product EAN8591111366372

Responsibility details are not available.

11.16 €
9.22 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The set captures pilots in modern flying gear. The JHMCS helmet is a cueing helmet that projects flight and targeting data straight onto the visor, so the pilot does not have to look down at the instrument panel and keeps his head turned toward the target. It is complemented by the oxygen mask designated MBU-14, clipped to the helmet at the sides. Crews equipped like this belong to the machines of today's generation, so the figures suit models of contemporary jet aircraft.

What the set contains

Figures of pilots for 1:72 scale. The number of pieces, the poses and any division of a figure into parts are given in the manufacturer's instructions. A seated figure is visible on a finished model through the glazing of the cockpit and gives a scene a sense of scale; a standing pilot beside the aircraft does the same on the surface of a diorama or on a display base.

Building and painting tips

Wash and degrease the figures before painting, otherwise the paint will not hold. Cut the surplus material away with a sharp blade a little off the part and sand the remainder carefully. Choose the glue according to the material of the parts; the particular procedure for preparing them is given in the manufacturer's instructions. Work from the base layer toward the details: the flight suit, then the harness and the gloves, and finally the visor of the helmet, to which a thin coat of gloss gives the impression of glass. A darker tone in the folds and a lighter one on the raised places give a small figure depth. With a cockpit, try the figure dry before you glue the glazing in.

  • 1:72 scale, figures of pilots in modern flying gear
  • a helmet with the JHMCS cueing system
  • the oxygen mask designated MBU-14
  • suited to the cockpit of a model and to the surface of a diorama alike
  • the number of pieces and the preparation of the parts are given in the manufacturer's instructions

Terms of supply

The aircraft model, the paints and the glue are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Figures of pilots in 1:72 scale. The number of pieces and any division of a figure into parts are given in the manufacturer's instructions. The aircraft model is not part of the delivery.

To models of contemporary jet aircraft, because gear with a cueing helmet belongs to the machines of today's generation.

A helmet that projects flight and targeting data straight onto the visor. The pilot therefore does not have to look down at the instrument panel.

Choose the glue according to the material of the parts, which the packaging gives. Wash and degrease the figures before painting, then work from the base layer toward the details.

Last seen

Rise144models144RM720131:72

1:72 Pilots with JHMSC helmet MBU-14 mask

Figures of pilots in 1:72 scale in modern flying gear: the JHMCS helmet and the oxygen mask designated MBU-14. An accessory for an aircraft model and for a diorama alike.
In stock
11.16 €
ReskitRSU48-01281:48

1:48 Lockheed-Martin F-35 (A/C) Lightning II exhaust nozzles

Lockheed-Martin F-35 (A/C) Lightning II exhaust nozzles is a resin set of the exhaust nozzle in 1:48 scale from Reskit for models of the F-35 fighter.
In stock
17.16 €
Dead DesignNM481541:48

1:48 F-4G Phantom II In And Out (MENG)

1:48 F-4G Phantom II In And Out is a double-sided masking set for the glazing of the cabin from Dead Design. The templates cover the inner and the outer side of the canopy, so the frame can be sprayed before the cabin is glued to the fuselage. Target kit: Meng.
In stock
10.76 €
New WareNWAM01801:72

1:72 B-52G Stratofortress ADVANCED kabuki masks

B-52G Stratofortress ADVANCED kabuki masks (1:72) is an extended set of self-adhesive New Ware masks for clean masking of the glazing, the wheels and further details of a strategic bomber model.
In stock
5.96 €
HAD modelsHADJ350141:35

1:35 Decal BRDM 3 Fagot (Hungarian)

1:35 HAD models decals, BRDM 3 Fagot (Hungarian markings) is a decal sheet for a model of the wheeled carrier of antitank guided missiles in 1:35 scale.
In stock
3.96 €
MontexMXSM485491:48

1:48 Sukhoi Su-25 Masking for Zvezda kits (outside, inside)

A masking set 1:48 Sukhoi Su-25 for the glazing of the armored cockpit of this Soviet attack aircraft. The name gives the version for the outer and the inner side. Intended for the Zvezda kit.
In stock
5.16 €
AiresAIR42431:48

1:48 P-51B/C Mustang gun bays

The resin detail set P-51B/C Mustang gun bays in 1:48 scale from Aires . It is a faithful casting of the wing gun bays as an accessory for a kit, not an airplane model.
In stock
16.80 €
SBS ModelSBS320011:32

1:32 Norden Bombsight for US Bombers WW II

SBS Model 1:32 Norden Bombsight for US Bombers WW II is an accessory for a model in 1:32 scale - the Norden bombsight for American bombers of the Second World War period. It is not a kit.
In stock
13.16 €
RT-DioramaRT357421:35

1:35 Printed Accessories: Factory glass windows No.6

The set Factory window fillings No.6 in 1:35 scale from RT-Diorama is a printed diorama accessory for the windows of industrial buildings in a scene.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.